Files
MeltMind/docs/claude/s2-design-v0.6-target-2026-11-14.md
T

1.5 KiB

S2 design v0.6: target ruling (Claude, 2026-11-14)

Evidence (MeltAstra, all 624 LOGs, no labels read):

  • Fill time = <positive> s appears inside the "Filling Control:" settings block.
  • It sits between Filling control type = Automatic and Stroke volume determination = Automatic, before "Filling Phase:" and before the first time-series header.
  • Examples: 850 at 0.40 s (line 242), 778 at 0.05 s (line 240), 666 at 0.40 s (line 250).
  • It is therefore a pre-solve process setting t_set.

Ruling (replaces v0.1 B and v0.5 item 1):

  • Primary target: t* = T / t_set, with t_set taken from the LOG settings block and given identically to every arm as a process input.
  • Scoring: seconds = t*·t_set. The per-part relative L2 is the same in seconds and in t*.
  • B0 in seconds: V*_f · t_set.
  • Scope statement:
    • The prediction is process-conditioned: deployment must supply the fill-time setting. This is not claimed as pure-geometry prediction.
    • Under Automatic control, Moldflow chose t_set from the geometry. It is a given setting, not a label. It never substitutes for the true T_max, and t_set is never compared with or mixed with actual end-of-fill values.
  • Not used:
    • "Maximum machine injection rate" (a machine limit, the same for all parts);
    • the time-series Flow Rate column;
    • any V/t-derived V̇.
  • The training-pool regression fallback ("predicted scale") from the 18:38 ruling is no longer needed. It stays documented as the rule should t_set be missing for any part; such a part fails closed and is reported.