docs: S2 v0.6 - target t/t_set with LOG fill-time setting as process input
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
1b55e16689
commit
9b71d56578
1 file changed
+20
@@ -0,0 +1,20 @@
|
||||
# S2 design v0.6: target ruling (Claude, 2026-11-14)
|
||||
|
||||
**Evidence (MeltAstra, all 624 LOGs, no labels read):**
|
||||
- `Fill time = <positive> s` appears inside the "Filling Control:" settings block.
|
||||
- It sits between `Filling control type = Automatic` and `Stroke volume determination = Automatic`, before "Filling Phase:" and before the first time-series header.
|
||||
- Examples: 850 at 0.40 s (line 242), 778 at 0.05 s (line 240), 666 at 0.40 s (line 250).
|
||||
- It is therefore a pre-solve process setting t_set.
|
||||
|
||||
**Ruling (replaces v0.1 B and v0.5 item 1):**
|
||||
- **Primary target:** t* = T / t_set, with t_set taken from the LOG settings block and given identically to every arm as a process input.
|
||||
- **Scoring:** seconds = t*·t_set. The per-part relative L2 is the same in seconds and in t*.
|
||||
- **B0 in seconds:** V*_f · t_set.
|
||||
- **Scope statement:**
|
||||
- The prediction is *process-conditioned*: deployment must supply the fill-time setting. This is not claimed as pure-geometry prediction.
|
||||
- Under Automatic control, Moldflow chose t_set from the geometry. It is a given setting, not a label. It never substitutes for the true T_max, and t_set is never compared with or mixed with actual end-of-fill values.
|
||||
- **Not used:**
|
||||
- "Maximum machine injection rate" (a machine limit, the same for all parts);
|
||||
- the time-series Flow Rate column;
|
||||
- any V/t-derived V̇.
|
||||
- The training-pool regression fallback ("predicted scale") from the 18:38 ruling is no longer needed. It stays documented as the rule should t_set be missing for any part; such a part fails closed and is reported.
|
||||
Reference in new issue
Block a user