Files
MeltMind/references/2026-11-17/phase1-physics/physics_targeted_global.json

4 lines
12 KiB
JSON
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
{
"result": "[Bi91] Numerical Simulation of Injection Molding of three-Dimensional Thin Parts (1991)\nUnknown Journal\nBy Lu Bi\nPDF X\n\nThis paper is concerned with the numerical simulation of the injection mold filling process. A mathematical model based on generalized Hele-Shaw flow for an inelastic non-Newtonian fluid under nonisothermal conditions is used.A hybrid numerical scheme is employed.The numerical simulating re- sults,pressure and temperature profile,location of the melt fronts,are in a good agreement with the ex- perimental ones.\n[Gue94] An examination of assumptions underlying the state of the art in injection molding modeling (1994)\nUnknown Journal\nDate: 1994-12-01\nBy D. Guell, P. Lovalenti - 5 citations - 0.2 cit./yr\nPDF X\n\nThe purpose of this paper is to place the modeling assumptions involved in injection molding filling simulation software in context by estimating and comparing the various errors associated with predicting the melt pressure within the cavity during filling. This is achieved by identifying specific sources of modeling, material property, and numerical errors and computing their relative magnitudes through simple scaling, or back-of-an-envelope, calculations. Thereby, the users of such software are provided with useful information for evaluating the expected accuracy of the solutions and for interpreting the output generated. The results presented shed additional light into the black box that mold filling simulations sometimes seem, much in the spirit as have previous examinations of issues such as convergence criteria and mesh density.\n[Mav86] Mathematical modeling of injection mold filling: A review (1986)\nAdvances in Polymer Technology, pp. 457-466\nDate: 1986-12-01\nBy H. Mavridis, A. Hrymak, J. Vlachopoulos - 28 citations - 0.7 cit./yr\nPDF X\n\nThe flow of molten polymers in molds is described by the conservation of mass, momentum, and energy. Several simplifications have been proposed in the last 40 years. The early models were essentially unidirectional approximations. More recently, the Hele–Shaw flow approximation has been used together with the appropriate analytical or numerical methods. Current developments include commercially available computer software based on network models for flow simulation in complex molds and modern sophisticated finite element solution of the complete conservation equations that give insight to fountain flow and small scale phenomena.\n[Wan86] Dynamic Simulation and Graphics for the Injection Molding of Three-Dimensional Thin Parts (1986)\nJournal of Polymer Engineering, pp. 21 - 46\nBy V. Wang, C. Hieber, K.-K. Wang - 115 citations - 2.8 cit./yr\nPDF X\n\nSummary A numerical formulation is presented for simulating the injection-molding filling of thin cavities, together with the delivery system, in three dimensions. The modelling is based on generalized Hele-Shaw flow for an inelastic, non-Newtonian fluid under non-isothermal conditions, which has been previously shown to be satisfactory for simulating the polymer melt flow in the cavities. A hybrid numerical scheme is employed in which the injection-molded part is described by two-dimensional triangular elements, provided that the cavity thickness is relatively thin, and the gapwise and time derivatives are expressed in terms of finite differences. The elements are flat, but can have any orientation in 3-D space to approximate the surfaces of the molded part. A triangular element is further divided into three sub-areas by joining the centroid of the element to the mid-point of its three edges. The control volume associated with any vertex node is then defined as the sum of all such sub-areas containing that node multiplied by each respective thickness. The numerical calculation of the flow field (or the pressure field) is based on the conservation of mass in each control volume which, at any given instant, can be either empty, partially filled, or totally filled with polymer melt. The melt-front location is defined by the partially filled control volumes which are allowed to advance in the calculation such that one partially filled control volume gets filled during each properly chosen time step with all of its adjacent empty control volumes then becoming new melt-front control volumes. The pressure and temperature are calculated at each time step, with the resulting pressure field determining the flow direction which, in turn, determines which partially-filled control volume should get filled during the following time step. One-dimensional flow segments, such as circular or non-circular tubes, can also be employed to represent the delivery system. This one-dimensional flow is coupled with the cavity filling in order to form a complete simulation of the mold filling. Comparisons with experiment have been made for a rectangular cavity with three inserts. The results show good agreement in terms of pressure traces and weldline locations. Another complex 3-D injection molded part has also been modelled to demonstrate the capability of the analysis.\n[Kim04] Developments of three-dimensional computer-aided engineering simulation for injection moulding (2004)\nModelling and Simulation in Materials Science and Engineering, pp. S151 - S173\nDate: 2004-05-01\nBy Sang-Woo Kim, L. Turng - 62 citations - 2.7 cit./yr\nPDF X\n\nThis paper presents the state-of-the-art technology and developments of three-dimensional computer-aided engineering (CAE) simulation for injection moulding. It is aimed at providing insights into the emerging three-dimensional CAE tools to facilitate judicious application and further developments of these tools for design and manufacturing of complex injection moulded parts. It begins with background information on the evolution of CAE for injection moulding, followed by a discussion of advantages and limitations inherent with the widely adopted 2.5-dimensional Hele–Shaw flow approximation. After that, the mathematical formulations and numerical methods used in three-dimensional simulation are presented. This paper also discusses some special issues related to three-dimensional simulation, such as intensive CPU requirement and solution resolution in the gap-wise direction. A number of illustrative examples are presented to demonstrate the capabilities of three-dimensional simulation and the difference between predictions from the 2.5-dimensional and three-dimensional analyses.\n[Coy87] The kinematics of fountain flow in mold‐filling (1987)\nAiche Journal, pp. 1168-1177\nDate: 1987-07-01\nBy D. Coyle, J. Blake, C. Macosko - 133 citations - 3.4 cit./yr\nPDF X\n\nMoldability criteria and process optimization for both reactive and thermoplastic injection molding hinge on the mold-filling step. The fluid mechanics of the filling step is typically described in terms of a one-dimensional main flow and a complex two-dimensional flow near the advancing front, often termed the “fountain flow.” A unique apparatus which permits direct observation of the fountain flow in a rectangular cavity is described. The motion of tracer lines as well as the pathlines have been photographed for both Newtonian and shear-thinning liquids. The data show clearly the main flow, the transition to the front flow, and the deceleration and acceleration zones in the fountain flow, which lead to a “mushrooming” of the tracer line. \n \nIn addition, Galerkin finite-element analysis is used to predict the isothermal free-surface flow of a Newtonian liquid near the advancing front between parallel plates. The most interesting visualization of the calculated flow is obtained by tracking lines of material, thus producing numerical tracer experiments. The calculations show the widely varying residence times and the complex shear and extensional deformation histories of fluid elements as they move through the fountain flow region. The calculations are in agreement with the experiments and clarify previous results, both theoretical and experimental, that did not capture the details of the entire flow field.\n[Pis02] Evaluation of a Model Describing the Advancing Flow Front in Injection Moulding (2002)\nInternational Polymer Processing, pp. 133 - 145\nDate: 2002-05-01\nBy Francesco Pisciotti, A. Boldizar, M. Rigdahl, G. Aronsson - 2 citations - 0.1 cit./yr\nPDF X\n\nAbstract The simulation of the advancing flow front during mould filling in the injection moulding cycle is important as a way of anticipating manufacturing defects, particularly different types of welds, air traps, cold spots and hot spots. The purpose of the present work was to evaluate a model (the distance model) simulating the advancing flow front and predicting potential issues related to the progression of the flow front such as welds and air traps. The distance model is based on a mathematical theory of Hele-Shaw flow for strongly shear-thinning fluids, i. e. fluids with a power-law index, n, equal to 0,3 or preferably less. Two grades of general-purpose polystyrene were selected according to their abilities to shear thin (weakly or moderately strong) at the selected processing temperature and in the typical shear rate range of the injection moulding process. The two grades were injection moulded into twelve mould configurations derived from two similar single-gated moulds. The flow length from the gate to the weld was measured in the mouldings obtained at three distinct rates of filling (conventional, slower and faster) and compared to the flow lengths obtained by the distance model. Good agreement was found between the predicted flow lengths and the experimental flow lengths at the conventional and faster filling conditions. Larger deviations between simulation and experiment were found at the slower filling rate, particularly for the weakly shear-thinning polystyrene grade. Some comparisons were also made with the predictions obtained using the commercial simulation code Moldflow. A comparison between the advancing front predictions of the distance model and experimental short shots of a commercial polypropylene grade in a lure-box type of mould geometry showed that the distance model, despite its simplicity, could probably be used to detect welds and air traps in more complex and practice-related mouldings.\n[Car08] Three Models of the 3D Filling Simulation for Injection Molding: A Brief Review (2008)\nJournal of Reinforced Plastics and Composites, pp. 1963 - 1974\nDate: 2008-03-28\nBy D. Cardozo - 34 citations - 1.8 cit./yr\nPDF X\n\nThis article reviews the state-of-the-art research and development in the 3D filling simulation of injection molding, most notably the different models. The article organizes prior studies into three sequential categories, namely, mid-plane models, surface models, and solid models. In the mid-plane models, the arbitrary planar mid-plane is used to represent the three-dimensional geometry of the part. Their model and formulation are presented based on the Hele—Shaw approximation. The article further discusses the main disadvantage of the mid-plane models, which introduces the surface models. The surface models represent a three-dimensional part with a boundary or skin mesh on the outside surfaces of a solid geometric model. This kind of model still adopts the Hele—Shaw approximation, but can avoid the re-modeling of the mid-plane. Subsequently, the situations that cannot be accurately predicted using the Hele—Shaw approximation are discussed, in which a full 3D simulation has become a promising solution. The leading 3D simulation approaches are summarized, including the finite element method, the finite volume method, the control-volume-based finite-element-method, and the boundary element method. The tracking algorithms of the melt fronts are also described.\n\nPDF symbols - ✓ PDF available; X No PDF available; … PDF download attempt in progress\n\nWhen presenting papers in your reply, fetch their DOIs with get_paper_info (show_doi=true) and present cite keys as [[cite_key]](https://doi.org/<DOI>). Use the Link returned by get_paper_info for papers without a DOI.\n\nIf you found relevant papers, show the best ones with display_references once you have finished searching. Users expect to see papers in a reference card (at most one per turn)."
}