73 lines
3.9 KiB
Markdown
73 lines
3.9 KiB
Markdown
# Single-cylinder free transverse VIV — PREDECLARATION DRAFT (not frozen)
|
||
|
||
Stage goal (Yanqi via TRON): prescribed Dütsch case + one VIV case both
|
||
"reasonably close" to a predeclared reference = development-stage success, then
|
||
cleanup. The frozen Dütsch settling failure (0/28 pairs at 31.25 T) stays on
|
||
record. Practical closeness is not a formal validation claim. No code until
|
||
this page is jointly agreed.
|
||
|
||
## Primary case (one case)
|
||
|
||
- Reference: Kolahdouz et al., arXiv:2003.12046, §4.1.1 (setup) and Qin et
|
||
al., arXiv:2003.12186, §4.5 (maximum amplitudes at U_red = 3…8: .075, .551,
|
||
.520, .459, .370, .084 D, as quoted by Grok/Astra from the text).
|
||
- Re = 150, U* = U/(f_n D) = 5, m/(rho D²) = 2 (m* = rho_s/rho_f = 8/pi),
|
||
zeta = 0, f_n = sqrt(K/M)/(2 pi) in vacuum. Transverse DOF only.
|
||
- Target: A_max = .520 D (peak amplitude, Qin §4.5). Multi-code reference
|
||
(Kolahdouz ILE-NS, Qin II-LBM). Reference uncertainty: not stated; the
|
||
spread between codes is not quantified here.
|
||
|
||
## Our reproduction (declared differences)
|
||
|
||
- D = 40, MRT, dense double buffer; U_lat = .04, nu = U D / 150 = .010667,
|
||
tau = .532.
|
||
- Box 75 D × 60 D (3000 × 2400, Kolahdouz class); cylinder position as in
|
||
Kolahdouz (OPEN: confirm; default 20 D from the inlet, centred in y).
|
||
- Boundaries: uniform Zou–He inlet, NEQ outlet (rho = 1, backflow clamp),
|
||
free-slip y walls. Kolahdouz uses a traction outlet: declared mismatch.
|
||
- Qin's own VIV box (40 D × 20 D) is not used; a smaller box would be a
|
||
declared cost cut with more blockage, not "the same case".
|
||
- Allowed y offset ±1.5 D; peak transverse speed ≈ .026 cells/step (bound .5).
|
||
|
||
## Structure, coupling and time levels
|
||
|
||
- M = 2 rho D² (lattice rho = 1), f_n = U/(5 D) = 2e-4 per step, K = M (2 pi f_n)²,
|
||
zeta = 0. Equation of motion uses the structural mass only.
|
||
- Time levels (binding): the target y^{n+1} must be set before step n runs
|
||
(`set_body`, then `run(1)`), so step n moves the body with (y^n, v^n) that
|
||
were advanced using F^{n-1} from the previous fluid step; step n measures
|
||
F^n. One step of explicit lag, declared.
|
||
- Structural update over one step with constant force F = F^{n-1} (exact
|
||
harmonic solution, zeta = 0): y_e = F/K, w = 2 pi f_n,
|
||
y^{n+1} = y_e + (y^n − y_e) cos w + (v^n / w) sin w,
|
||
v^{n+1} = −(y^n − y_e) w sin w + v^n cos w.
|
||
- Primary RHS (single coupled run): CME + Wen (theory-motivated stage choice:
|
||
Galilean-invariant link correction; G4 could not separate it from CME).
|
||
Raw CME and the node terms are logged as diagnostics of that trajectory;
|
||
the node impulse is not added. A run with CME-only as RHS is a separate,
|
||
labelled sensitivity case, decided separately. Neither RHS is claimed proven.
|
||
|
||
## Window, failure semantics, acceptance (engineering, development stage)
|
||
|
||
- Settled when the per-cycle peak |y| changes ≤ 2 % between consecutive
|
||
10-cycle windows and the last 5 cycle peaks agree within 1 %; cap 150
|
||
oscillation cycles.
|
||
- FAIL-CLOSED and reported (no sub-iteration, no RHS or parameter retune):
|
||
unsettled at the cap, |y| beyond the declared offset box, no_donor > 0, or a
|
||
growing/diverging amplitude (coupling instability at m* ≈ 2.55).
|
||
- Score over the 20 cycles after settling: A_max/D (mean of cycle peaks) and
|
||
f/f_n (reported; no target).
|
||
- Acceptance: |A_max − .520 D| ≤ .052 D (±10 %), stated together with the
|
||
boundary mismatch and the absence of a quoted reference uncertainty. A pass
|
||
is "reasonably close" for the stage: not grid convergence, not force-RHS
|
||
validation, and it does not touch the Dütsch settling record.
|
||
- Driver reads force and the small diagnostics per step only; field reads
|
||
only at a few predeclared snapshots. Cost from Astra's no-dump timing on
|
||
this grid.
|
||
|
||
## Queued, not in this stage
|
||
|
||
Leontini et al. JFS 22 (2006) Re = 200, m* = 10, zeta = 0.01, U* = 5.0 (needs
|
||
the owners' c_crit convention and a Fig. 1 digitization). D80, literature
|
||
claims, pinball, AMR, BC redesign, threshold changes.
|