docs: cite only the recorded MRT parity pass (K1 7813334)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

docs/supported_settings.md

@@ -0,0 +1,87 @@
+# Supported settings: 2D Jet + fixed multilevel refinement (candidate c95a7ba)
+
+Every entry names the guard that enforces it (file:line at c95a7ba) and, where one
+exists, an existing test that exercises it. A setting not listed here is not
+claimed. Observations at the end are tied to the exact case in which they were
+measured; they are not general bounds.
+
+## Lattice, storage, collision
+
+| Setting | Supported | Guard |
+|---|---|---|
+| Dimension / lattice | 2D D2Q9 only (3D refinement is future work) | `lbm/refinement.py:65`, `lbm/kernels/blocks.cu:25`, `lbm/kernels/refinement.cu:26` |
+| Precision / streaming | FP32 storage, double buffer | same guards |
+| Collision on refinement levels | SRT or MRT; TRT and LES rejected | `lbm/refinement.py:65` (re-checked for fine boundaries at `lbm/refinement.py:457`) |
+| Shifted (ddf_shifting) storage | only when every level is blocked; dense or mixed rejected | `lbm/refinement_stepper.py:198`, `:469`; `lbm/kernels/refinement.cu:26` (dense patch kernel unshifted only) |
+| Fine relaxation | 1/tau_fine must lie inside the configured omega guards | `lbm/refinement.py:80` |
+| Uniform blocked backend `PeriodicBlockStepper` | doubly periodic, SRT only, stationary passive circles | `lbm/block_stepper.py:84`, `:91`, `:45`-`:67` |
+
+Tests: `tests/unit/test_refinement_mrt.py`, `tests/validation/multigrid/test_refinement_mrt_gpu.py`,
+`tests/unit/test_shifted_storage.py`, `tests/unit/test_shifted_block_operators.py`.
+
+## Refinement hierarchy (`FixedPatchStepper(cfg, *, context, refinements, ...)`)
+
+| Setting | Supported | Guard |
+|---|---|---|
+| Depth | at least one refinement level; one entry per level in `level_blocks`/`level_objects`/`level_jets` | `lbm/refinement_stepper.py:72`, `:75` |
+| Single L1 rectangle | two-coarse-cell margin to the domain edge | `lbm/refinement.py:73` |
+| Several L1 rectangles (union) | require `level_blocks[0]` and `level_blocks[1]`; transfers must close (dependency checks, no fixed gap rule) | `lbm/refinement_stepper.py:84`; `lbm/refinement.py:283`-`:295` |
+| Nested levels | depth >= 3 must be all blocked; a blocked level requires blocked levels below; a scalar child needs a scalar parent | `lbm/refinement_stepper.py:82`, `:87`; `lbm/hierarchy.py:54` |
+| Nested transfer support | child only over inherited ACTIVE cells, donors/receivers uncovered ACTIVE, no child over the parent restriction footprint | `lbm/refinement.py:391`-`:407` |
+| Tile shape | positive `(by, bx)`; the level allocation must be divisible by the tile (no partial tiles yet) | `lbm/refinement_stepper.py:78`, `lbm/refinement.py:246` (shape); `lbm/blocks.py:134` (divisibility) |
+| Coarse boundary | `periodic`, `slot_reservoir` or `channel` | `lbm/refinement_stepper.py:177` |
+| `slot_reservoir` | on-site velocity bottom slot, reservoir top, velocity 0, 2 <= slot width < nx, patch rows 4..ny-4 | `lbm/refinement_stepper.py:205`, `:212`; `lbm/refinement.py:546` |
+| `channel` | all levels blocked; Zou-He inlet, pressure-NEQ outlet, stationary bounce-back walls; transfers away from the closure | `lbm/channel.py:22`, `:26`, `:43`, `:54` |
+| Explosion | `constant` (default); `projected_linear` only periodic, all-blocked SRT, no bodies/Jets, no LES (experimental) | `lbm/refinement_stepper.py:188`, `:193` |
+| L2 runtime remap (`remap_child`) | periodic three-level L2 sets only, no L0/L1 bodies, identical pinned boundary | `lbm/refinement_stepper.py:557`, `:567`-`:581` |
+
+Tests: `tests/unit/test_refinement_three_level_multipatch.py`, `tests/validation/multigrid/test_refinement_multipatch.py`,
+`test_refinement_three_level.py`, `test_refinement_three_level_multipatch_gpu.py`, `test_refinement_blocked_base.py`,
+`test_refinement_blocked_fine.py`, `test_channel_root_gpu.py`, `tests/unit/test_channel_root.py`,
+`tests/unit/test_projected_pair_stepper.py`, `test_runtime_child_remap_gpu.py`, `test_pinned_body_remap_gpu.py`.
+
+## Bodies and Jets on refined levels
+
+| Setting | Supported | Guard |
+|---|---|---|
+| Bodies | stationary circles without sensor/force-region roles, entirely inside the patch union, fully resolved, disjoint, stencil away from the two-hop transfer footprint | `lbm/refinement.py:474`-`:542` |
+| Level | not on L0; only on the finest level of a nested hierarchy | `lbm/refinement_stepper.py:80`, `:89` |
+| Jet condition | velocity only; `pressure` is reserved and raises NotImplementedError | `body/jets.py:148`, `:150` |
+| Jet geometry | each Jet selects resolved links of exactly one stationary body; no Jet/Jet or Jet/SurfaceActuation overlap; abs(amplitude) < 1 lattice | `body/jets.py:155`, `:175`, `:177`, `:255`, `:261`, `:263` |
+| Jets with shifted storage | only in the all-blocked stepper with SRT and no LES | `body/jets.py:249` |
+| SurfaceActuation | unshifted storage only | `body/objects.py:155` |
+| Raw boundary exchange (force) | blocked body levels only; the window ledger requires `observe_raw_exchange` | `lbm/refinement_stepper.py:264`, `:269` |
+| Checkpoint with Jets | refused | `simulation.py:687` |
+
+Raw exchange is the cut-link momentum reaction (wall + aperture), not a validated
+nozzle thrust or stress load. Jet amplitude is a lattice velocity, not a flow rate.
+
+Tests: `tests/unit/test_jets.py`, `test_jets_review.py`, `test_shifted_jets.py`, `test_raw_exchange.py`,
+`tests/validation/multigrid/test_refinement_jets.py`, `test_shifted_jets_gpu.py`, `test_raw_exchange_gpu.py`,
+`test_exchange_window.py`, `test_fine_surface_gpu.py`.
+
+## Observations from specific tested cases (not general bounds)
+
+- SRT channel root vs uniform OneStep, strict-parity test
+  `tests/validation/multigrid/test_channel_root_gpu.py::ChannelRootGPU::test_uniform_matched_root`:
+  in one of its 18 sub-cases (2 storage modes x 3 profile/clamp/damp settings x 3 blocks; which
+  one is not recorded), 1 of the 4320 compared values differs, max abs 2.33e-10, max rel 1.77e-7
+  (about 2 ULP). The test remains failed; its cause and any general bound are unresolved.
+- MRT root parity test
+  `tests/validation/multigrid/test_refinement_mrt_gpu.py::RefinementMRTGPU::test_uniform_matched_mrt_root`
+  (12 sub-cases: 2 storage modes x 2 profiles x 3 blocks, default outlet settings) passed bitwise
+  in the Horsea focused GPU run at K1 7813334 (2026-10-21).
+- Periodic Taylor-Green Re 100, measured at 36ffc8b1 (V3 matched pair, N128 depth 2):
+  every per-sample screen passed; the constant explosion's aggregate worst velocity L2,
+  0.004418, exceeds its preregistered 0.002 budget, while projected_linear passed that budget.
+- Curved-wall pressure (pilot harness, exact-q analytic annulus, tau 0.8): the coarse swirl r1
+  case exceeded its terminal density-gain cap (1.105e-4 vs 1e-4), so the frozen 9-case matrix
+  is NOT_ESTABLISHED. No validated fix exists. This is a pilot harness, not production code.
+- DFG 2D-1 Re 20 (V4, SRT, t* 60, pressure-NEQ outlet and local Zou-He inlet): refined and uniform
+  runs were NOT_STEADY under the frozen steady rule, so no interval verdict was given.
+
+## Not supported in this release
+
+3D, dynamic/automatic AMR (tagging, time-varying hierarchies beyond `remap_child`),
+moving bodies on refined levels, pressure Jets, Jet checkpoints, LES or TRT on refined
+levels, partial (non-dividing) tiles.

tests/validation/taylor_green/test_projected_pairs.py

@@ -249,19 +249,35 @@ class ProjectedPairsTests(unittest.TestCase):
         self.assertFalse(assess(incomplete)["comparisons"][3]["passed"])
 
     def test_pinned_build_sources_match_host_generated_inputs(self):
+        """The pinned fingerprints are what today's compiler generates from the qualified
+        NUMERICAL_REVISION kernels; the current kernels may legitimately differ."""
+        import tarfile
         from CelerisLab.cuda import compiler_v2
 
-        for size in (128, 256):
-            cfg = replace(run_case.config(size, 100), nx=10, ny=10)
-            cfg.validate()
-            root = compiler_v2.generate_config(cfg)
-            try:
-                actual = json.loads((Path(root) / ".celeris-build").read_text())
-                expected = build_metadata(size)
-                self.assertEqual(actual, {key: expected[key] for key in
-                                          ("source_sha256", "config", "n_objects")})
-            finally:
-                compiler_v2.cleanup_build_dir(root)
+        kernels = "src/CelerisLab/lbm/kernels"
+        if subprocess.run(["git", "-C", str(REPO), "cat-file", "-e",
+                           f"{NUMERICAL_REVISION}^{{commit}}"], capture_output=True).returncode:
+            self.fail(f"{NUMERICAL_REVISION} is not in this clone; the pinned build "
+                      "sources cannot be checked")
+        archive = subprocess.run(["git", "-C", str(REPO), "archive", "--format=tar",
+                                  NUMERICAL_REVISION, kernels],
+                                 capture_output=True, check=True).stdout
+        with tempfile.TemporaryDirectory() as snapshot:
+            with tarfile.open(fileobj=io.BytesIO(archive)) as tar:
+                tar.extractall(snapshot)
+            with patch.object(compiler_v2, "_KERNEL_DIR", str(Path(snapshot) / kernels)):
+                for size in (128, 256):
+                    with self.subTest(size=size):
+                        cfg = replace(run_case.config(size, 100), nx=10, ny=10)
+                        cfg.validate()
+                        root = compiler_v2.generate_config(cfg)
+                        try:
+                            actual = json.loads((Path(root) / ".celeris-build").read_text())
+                            expected = build_metadata(size)
+                            self.assertEqual(actual, {key: expected[key] for key in
+                                                      ("source_sha256", "config", "n_objects")})
+                        finally:
+                            compiler_v2.cleanup_build_dir(root)
 
     def test_source_preflight_requires_clean_exact_revision_and_tree(self):
         import oracle