683 lines
38 KiB
Plaintext
683 lines
38 KiB
Plaintext
--------------------------------------------------------------------------
|
|
|
|
Using C:\Users\greifjul\Documents\My AMI 2023 Projects\runsdyTmp_vmt4b as the temporary directory
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
Copying study file to temporary directory
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
Launching analysis sequence Flow
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
C:\Program Files\Autodesk\Moldflow Insight 2023\bin\mhb3d -gpu -mes raw -fill -pack -output 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study~3 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study.udm
|
|
|
|
Copyright Autodesk, Inc. All rights reserved.
|
|
|
|
(C)2009 2010 2011 2012 2013 2014 2015 2016
|
|
|
|
(C)2017 2018 2019 2020 2021 2022
|
|
|
|
Portions of this software are covered by U.S. Patent Numbers 5,287,408 and 6,096,088.
|
|
|
|
|
|
|
|
|
|
|
|
Attempting to acquire the required solver license at: Sat Jun 8 19:47:26 2024
|
|
|
|
Solver license acquired successfully at: Sat Jun 8 19:47:27 2024
|
|
|
|
|
|
|
|
Coupled 3D Flow Solver.
|
|
|
|
|
|
|
|
Version: Autodesk Moldflow Insight 2023 (Build 211)
|
|
|
|
64-bit build
|
|
|
|
|
|
|
|
Analysis running on host: mateng04
|
|
|
|
Operating System: Windows 10 ( Build 19045 )
|
|
|
|
Processor type: GenuineIntel Intel64 Family 6 Model 158 Stepping 10 ~2904 MHz
|
|
|
|
Number of Processors: 6
|
|
|
|
Total Physical Memory: 16124 MBytes
|
|
|
|
|
|
|
|
|
|
|
|
Analysis commenced at Sat Jun 8 19:47:27 2024
|
|
|
|
Mesh and boundary conditions file name : 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study.udm
|
|
|
|
Results files core name : 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study~3
|
|
|
|
|
|
|
|
|
|
|
|
Residual stress calculation : ON
|
|
|
|
Core shift calculation : ON
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Solver Parameters:
|
|
|
|
=================
|
|
|
|
|
|
|
|
Solver setup:
|
|
|
|
------------
|
|
|
|
Solver = Coupled 3D
|
|
|
|
Solution type = Stokes
|
|
|
|
Simulate inertia effect = No
|
|
|
|
Simulate gravity effect = No
|
|
|
|
Simulate wall slip = No
|
|
|
|
Gate diameter at cavity injection locations = Automatic
|
|
|
|
|
|
|
|
Filling parameters:
|
|
|
|
------------------
|
|
|
|
Maximum % volume to fill per time step = 1.000 %
|
|
|
|
Maximum iterations per time step = 50
|
|
|
|
Convergence tolerance (scaling factor) = 1.000
|
|
|
|
Flow front scheme = Level set
|
|
|
|
|
|
|
|
Packing parameters:
|
|
|
|
------------------
|
|
|
|
Maximum time step = 2.000 s
|
|
|
|
Maximum iterations per time step = 50
|
|
|
|
Convergence tolerance (scaling factor) = 1.000
|
|
|
|
|
|
|
|
Intermediate results:
|
|
|
|
--------------------
|
|
|
|
Intermediate results type = Write at constant intervals
|
|
|
|
Number of intermediate results in filling phase = 100
|
|
|
|
Number of intermediate results in packing phase = 5
|
|
|
|
Number of intermediate results in cooling phase = 3
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Material Data:
|
|
|
|
=============
|
|
|
|
|
|
|
|
Manufacturer Celanese
|
|
|
|
Trade name Factor PP GF 30
|
|
|
|
Family name PP
|
|
|
|
|
|
|
|
Specific heat: Tabulated data:
|
|
|
|
Temperature Specific Heat
|
|
|
|
T (K) Cp (J/kg-K)
|
|
|
|
----------- -------------
|
|
|
|
293.1500 1540.0000
|
|
|
|
373.1500 2280.0000
|
|
|
|
403.1500 2820.0000
|
|
|
|
413.1500 3210.0000
|
|
|
|
423.1500 4090.0000
|
|
|
|
433.1500 6300.0000
|
|
|
|
443.1500 3940.0000
|
|
|
|
453.1500 2770.0000
|
|
|
|
473.1500 2880.0000
|
|
|
|
503.1500 3060.0000
|
|
|
|
523.1500 3190.0000
|
|
|
|
543.1500 3350.0000
|
|
|
|
|
|
|
|
Thermal conductivity: Tabulated data:
|
|
|
|
Temperature Thermal Conductivity
|
|
|
|
T (K) K (W/m-K)
|
|
|
|
----------- --------------------
|
|
|
|
320.1500 0.2000
|
|
|
|
330.1500 0.2050
|
|
|
|
371.1500 0.2470
|
|
|
|
392.1500 0.2370
|
|
|
|
413.1500 0.2270
|
|
|
|
432.1500 0.2140
|
|
|
|
452.1500 0.2230
|
|
|
|
471.1500 0.2280
|
|
|
|
481.1500 0.2330
|
|
|
|
501.1500 0.2400
|
|
|
|
521.1500 0.2440
|
|
|
|
|
|
|
|
Transition temperature = 407.1500 K
|
|
|
|
pvT Model: 2-domain modified Tait
|
|
|
|
coefficients: b5 = 408.1500 K
|
|
|
|
b6 = 2.3100E-07 K/Pa
|
|
|
|
Liquid phase Solid phase
|
|
|
|
-------------------------------
|
|
|
|
b1m = 0.0010 b1s = 0.0009 m^3/kg
|
|
|
|
b2m = 5.5220E-07 b2s = 2.9510E-07 m^3/kg-K
|
|
|
|
b3m = 1.2036E+08 b3s = 2.6346E+08 Pa
|
|
|
|
b4m = 0.0038 b4s = 0.0058 1/K
|
|
|
|
b7 = 7.8230E-05 m^3/kg
|
|
|
|
b8 = 0.1351 1/K
|
|
|
|
b9 = 3.3700E-08 1/Pa
|
|
|
|
|
|
|
|
Viscosity model: Cross-WLF
|
|
|
|
coefficients: n = 0.3251
|
|
|
|
TAUS = 2.0200E+04 Pa
|
|
|
|
D1 = 5.8200E+11 Pa-s
|
|
|
|
D2 = 263.1500 K
|
|
|
|
D3 = 0.0000 K/Pa
|
|
|
|
A1 = 26.1370
|
|
|
|
A2T = 51.6000 K
|
|
|
|
|
|
|
|
Mechanical properties data: E1 = 7.1461E+09 Pa
|
|
|
|
E2 = 3.3514E+09 Pa
|
|
|
|
v12 = 0.4459
|
|
|
|
v23 = 0.4895
|
|
|
|
G12 = 1.5830E+09 Pa
|
|
|
|
|
|
|
|
Transversely isotropic coefficient of
|
|
|
|
thermal expansion (CTE) data: Alpha1 = 0.0000182 1/K
|
|
|
|
Alpha2 = 0.0000509 1/K
|
|
|
|
|
|
|
|
Confidential filler properties exist but not displayed
|
|
|
|
|
|
|
|
Polymer matrix property (values from database will be used)
|
|
|
|
Polymer matrix mechanical properties data: E = 1.3400E+09 Pa
|
|
|
|
v = 0.3920
|
|
|
|
|
|
|
|
Polymer matrix coefficient of thermal
|
|
|
|
expansion (CTE) data: Alpha1 = 0.0000905 1/K
|
|
|
|
|
|
|
|
|
|
|
|
No mesh for the cores was found.
|
|
|
|
Core shift analysis switched OFF
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Model Details:
|
|
|
|
=============
|
|
|
|
|
|
|
|
Mesh Type = 3D Tetrahedra
|
|
|
|
Tetrahedral refinement layers (specified minimum) = 10
|
|
|
|
Total number of part nodes = 24418
|
|
|
|
Number of tetrahedron nodes = 24418
|
|
|
|
Total number of injection location nodes = 1
|
|
|
|
The injection location node numbers are:
|
|
|
|
24416
|
|
|
|
|
|
|
|
Total number of elements = 129189
|
|
|
|
Number of part elements = 129189
|
|
|
|
Number of tetrahedral elements = 129189
|
|
|
|
|
|
|
|
Total volume = 1.5974E-05 m^3
|
|
|
|
Volume of tetrahedral elements = 1.5974E-05 m^3
|
|
|
|
Volume filled initially = 0.0000 m^3
|
|
|
|
Volume to be filled = 1.5974E-05 m^3
|
|
|
|
Part volume to be filled = 1.5974E-05 m^3
|
|
|
|
Sprue/runner/gate volume to be filled = 0.0000 m^3
|
|
|
|
Parting plane normal (dx) = 0.0000
|
|
|
|
(dy) = 0.0000
|
|
|
|
(dz) = 1.0000
|
|
|
|
Total projected area = 0.0010 m^2
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Fiber orientation calculation : ON
|
|
|
|
|
|
|
|
Fiber Orientation Calculation Parameters
|
|
|
|
========================================
|
|
|
|
Fiber orientation model = ARD-RSC
|
|
|
|
Reduced Strain Closure factor = 0.1000
|
|
|
|
Bi parameters in ARD model b1 = 0.000192
|
|
|
|
b2 = 0.005839
|
|
|
|
b3 = 0.040000
|
|
|
|
b4 = 0.000012
|
|
|
|
b5 = 0.000000
|
|
|
|
Fiber inlet condition option = Fibers aligned at skin / random at core
|
|
|
|
Fiber inlet condition applied at gate
|
|
|
|
|
|
|
|
Mechanical Property Calculation Options
|
|
|
|
=======================================
|
|
|
|
Micro-mechanics model option = Automatic
|
|
|
|
Tandon-Weng micromechanics model is chosen for the analysis
|
|
|
|
Thermal expansion coefficient model option = Rosen-Hashin
|
|
|
|
Closure approximation model option = Orthotropic 3
|
|
|
|
|
|
|
|
|
|
|
|
** WARNING 304920 ** There is insufficient refinement of the tetrahedral mesh in some areas, which
|
|
|
|
may affect solution accuracy. Inspect with the "Node layer number" plot and
|
|
|
|
consider improving the mesh. [For the 10 tetrahedral refinement layers requested,
|
|
|
|
the node layer number is expected to reach 6 at the part centerline.]
|
|
|
|
** WARNING 304940 ** The node layer number on the part centerline is more than one less than requested
|
|
|
|
(i.e. 4 or less) for 2.8 percent of the part.
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Process Settings:
|
|
|
|
================
|
|
|
|
|
|
|
|
Machine parameters:
|
|
|
|
------------------
|
|
|
|
Maximum injection pressure = 1.8000E+08 Pa
|
|
|
|
Maximum machine clamp force = 6.8670E+07 N
|
|
|
|
Apply the clamp force limit = No
|
|
|
|
Maximum machine injection rate = 5.0000E-03 m^3/s
|
|
|
|
Machine hydraulic response time = 1.0000E-02 s
|
|
|
|
|
|
|
|
Temperature control:
|
|
|
|
-------------------
|
|
|
|
Melt temperature = 543.15 K
|
|
|
|
Mold temperature = 318.15 K
|
|
|
|
Mold-melt heat transfer coefficients
|
|
|
|
Global values. (Superseded by any values set on individual elements.)
|
|
|
|
Filling = 5000.0000 W/m^2-K
|
|
|
|
Packing = 2500.0000 W/m^2-K
|
|
|
|
Detached = 1250.0000 W/m^2-K
|
|
|
|
Atmospheric temperature = 298.15 K
|
|
|
|
|
|
|
|
Filling Control:
|
|
|
|
---------------
|
|
|
|
Filling control type = Automatic
|
|
|
|
Fill time = 0.10 s
|
|
|
|
Stroke volume determination = Automatic
|
|
|
|
|
|
|
|
Velocity/pressure switch-over control:
|
|
|
|
-------------------------------------
|
|
|
|
Velocity/pressure switch-over control type = Automatic
|
|
|
|
|
|
|
|
Pack/holding control:
|
|
|
|
--------------------
|
|
|
|
Pack/holding control type = % Filling pressure vs time
|
|
|
|
Pressure profile:
|
|
|
|
duration % filling pressure
|
|
|
|
-----------------------------
|
|
|
|
0.00 s 80.00
|
|
|
|
10.00 s 80.00
|
|
|
|
|
|
|
|
Cooling time:
|
|
|
|
------------
|
|
|
|
Cooling time determination = Specified
|
|
|
|
Cooling time = 231.0000 s
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Matrix Solver Settings:
|
|
|
|
======================
|
|
|
|
AMG matrix solver selection = Automatic
|
|
|
|
Matrix solver used = AMG
|
|
|
|
Number of threads for parallelization = Automatic
|
|
|
|
Initial number of threads used in the analysis = 6
|
|
|
|
--------------------------------------------------------------------------
|
|
|
|
|
|
|
|
Filling Phase: Status: V = Velocity control
|
|
|
|
============= V/P = Velocity/pressure switch-over
|
|
|
|
P = Pressure control
|
|
|
|
|----------------------------------------------------------------------|
|
|
|
|
| Time | Fill Vol| Inj Press | Clamp F | Flow Rate| Frozen | Status|
|
|
|
|
| (s) | (%) | (Pa) | (N) | (m^3/s) | Vol (%)| |
|
|
|
|
|----------------------------------------------------------------------|
|
|
|
|
| 0.000 | 0.035 | 3.368e+05 | 3.74e-12 | 0.000 | 0.00 | V |
|
|
|
|
| 0.000 | 0.329 | 6.385e+05 | 8.59e-12 | 0.000 | 0.00 | V |
|
|
|
|
| 0.001 | 0.662 | 7.854e+05 | 1.10e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.002 | 1.579 | 8.721e+05 | 1.35e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.003 | 2.431 | 9.010e+05 | 1.46e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.004 | 3.704 | 9.269e+05 | 1.61e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.005 | 4.821 | 9.436e+05 | 1.77e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.006 | 5.882 | 9.549e+05 | 1.90e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.007 | 6.891 | 9.645e+05 | 2.06e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.008 | 7.930 | 9.723e+05 | 2.20e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.009 | 8.931 | 9.791e+05 | 2.36e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.010 | 9.926 | 9.868e+05 | 2.58e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.011 | 10.904 | 9.939e+05 | 2.81e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.012 | 11.876 | 1.001e+06 | 3.13e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.013 | 12.818 | 1.006e+06 | 3.51e-11 | 0.000 | 0.00 | V |
|
|
|
|
| 0.014 | 13.768 | 1.012e+06 | 3.49e-03 | 0.000 | 0.00 | V |
|
|
|
|
| 0.015 | 14.713 | 1.018e+06 | 7.00e-02 | 0.000 | 0.00 | V |
|
|
|
|
| 0.016 | 15.701 | 1.023e+06 | 3.00e-01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.017 | 16.643 | 1.029e+06 | 6.33e-01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.018 | 17.568 | 1.034e+06 | 9.65e-01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.019 | 18.518 | 1.038e+06 | 1.37e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.020 | 19.477 | 1.043e+06 | 1.88e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.021 | 20.417 | 1.047e+06 | 2.46e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.022 | 21.360 | 1.052e+06 | 3.10e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.023 | 22.305 | 1.056e+06 | 3.62e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.023 | 23.260 | 1.060e+06 | 4.18e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.024 | 24.202 | 1.065e+06 | 5.25e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.025 | 25.135 | 1.069e+06 | 6.04e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.026 | 26.062 | 1.074e+06 | 7.20e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.027 | 26.983 | 1.078e+06 | 8.36e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.028 | 27.901 | 1.084e+06 | 9.74e+00 | 0.000 | 0.00 | V |
|
|
|
|
| 0.029 | 28.835 | 1.088e+06 | 1.14e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.030 | 29.773 | 1.094e+06 | 1.33e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.031 | 30.691 | 1.100e+06 | 1.55e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.032 | 31.613 | 1.106e+06 | 1.82e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.033 | 32.513 | 1.111e+06 | 2.04e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.034 | 33.442 | 1.117e+06 | 2.25e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.035 | 34.359 | 1.122e+06 | 2.51e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.036 | 35.290 | 1.127e+06 | 2.73e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.037 | 36.187 | 1.132e+06 | 2.96e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.037 | 37.109 | 1.137e+06 | 3.19e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.038 | 38.037 | 1.142e+06 | 3.42e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.039 | 38.936 | 1.146e+06 | 3.58e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.040 | 39.880 | 1.150e+06 | 3.78e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.041 | 40.797 | 1.154e+06 | 3.94e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.042 | 41.706 | 1.159e+06 | 4.13e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.043 | 42.644 | 1.163e+06 | 4.26e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.044 | 43.582 | 1.167e+06 | 4.44e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.045 | 44.512 | 1.170e+06 | 4.60e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.046 | 45.441 | 1.174e+06 | 4.75e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.047 | 46.397 | 1.177e+06 | 4.90e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.048 | 47.355 | 1.180e+06 | 5.05e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.049 | 48.295 | 1.184e+06 | 5.21e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.050 | 49.230 | 1.187e+06 | 5.35e+01 | 0.000 | 0.00 | V |
|
|
|
|
| 0.051 | 50.175 | 1.190e+06 | 5.48e+01 | 0.000 | 0.01 | V |
|
|
|
|
| 0.052 | 51.120 | 1.194e+06 | 5.66e+01 | 0.000 | 0.01 | V |
|
|
|
|
| 0.053 | 52.064 | 1.197e+06 | 5.82e+01 | 0.000 | 0.01 | V |
|
|
|
|
| 0.053 | 52.980 | 1.200e+06 | 5.96e+01 | 0.000 | 0.01 | V |
|
|
|
|
| 0.054 | 53.922 | 1.204e+06 | 6.12e+01 | 0.000 | 0.01 | V |
|
|
|
|
| 0.055 | 54.839 | 1.206e+06 | 6.25e+01 | 0.000 | 0.01 | V |
|
|
|
|
| 0.056 | 55.779 | 1.210e+06 | 6.41e+01 | 0.000 | 0.02 | V |
|
|
|
|
| 0.057 | 56.740 | 1.212e+06 | 6.54e+01 | 0.000 | 0.02 | V |
|
|
|
|
| 0.058 | 57.663 | 1.215e+06 | 6.67e+01 | 0.000 | 0.02 | V |
|
|
|
|
| 0.059 | 58.610 | 1.219e+06 | 6.85e+01 | 0.000 | 0.02 | V |
|
|
|
|
| 0.060 | 59.546 | 1.222e+06 | 6.99e+01 | 0.000 | 0.03 | V |
|
|
|
|
| 0.061 | 60.512 | 1.225e+06 | 7.16e+01 | 0.000 | 0.03 | V |
|
|
|
|
| 0.062 | 61.462 | 1.228e+06 | 7.29e+01 | 0.000 | 0.04 | V |
|
|
|
|
| 0.063 | 62.393 | 1.231e+06 | 7.44e+01 | 0.000 | 0.04 | V |
|
|
|
|
| 0.064 | 63.343 | 1.234e+06 | 7.58e+01 | 0.000 | 0.04 | V |
|
|
|
|
| 0.065 | 64.295 | 1.236e+06 | 7.74e+01 | 0.000 | 0.05 | V |
|
|
|
|
| 0.066 | 65.228 | 1.239e+06 | 7.86e+01 | 0.000 | 0.05 | V |
|
|
|
|
| 0.067 | 66.175 | 1.242e+06 | 8.02e+01 | 0.000 | 0.06 | V |
|
|
|
|
| 0.068 | 67.119 | 1.244e+06 | 8.17e+01 | 0.000 | 0.06 | V |
|
|
|
|
| 0.069 | 68.076 | 1.247e+06 | 8.32e+01 | 0.000 | 0.07 | V |
|
|
|
|
| 0.070 | 69.013 | 1.251e+06 | 8.50e+01 | 0.000 | 0.07 | V |
|
|
|
|
| 0.071 | 69.926 | 1.254e+06 | 8.67e+01 | 0.000 | 0.08 | V |
|
|
|
|
| 0.072 | 70.871 | 1.257e+06 | 8.87e+01 | 0.000 | 0.08 | V |
|
|
|
|
| 0.073 | 71.813 | 1.261e+06 | 9.08e+01 | 0.000 | 0.09 | V |
|
|
|
|
| 0.074 | 72.711 | 1.264e+06 | 9.30e+01 | 0.000 | 0.09 | V |
|
|
|
|
| 0.074 | 73.631 | 1.268e+06 | 9.54e+01 | 0.000 | 0.10 | V |
|
|
|
|
| 0.075 | 74.546 | 1.272e+06 | 9.80e+01 | 0.000 | 0.10 | V |
|
|
|
|
| 0.076 | 75.481 | 1.277e+06 | 1.01e+02 | 0.000 | 0.11 | V |
|
|
|
|
| 0.077 | 76.370 | 1.282e+06 | 1.05e+02 | 0.000 | 0.12 | V |
|
|
|
|
| 0.078 | 77.285 | 1.287e+06 | 1.08e+02 | 0.000 | 0.12 | V |
|
|
|
|
| 0.079 | 78.216 | 1.293e+06 | 1.13e+02 | 0.000 | 0.13 | V |
|
|
|
|
| 0.080 | 79.108 | 1.298e+06 | 1.17e+02 | 0.000 | 0.13 | V |
|
|
|
|
| 0.081 | 80.001 | 1.303e+06 | 1.21e+02 | 0.000 | 0.14 | V |
|
|
|
|
| 0.082 | 80.930 | 1.308e+06 | 1.26e+02 | 0.000 | 0.15 | V |
|
|
|
|
| 0.083 | 81.841 | 1.314e+06 | 1.31e+02 | 0.000 | 0.15 | V |
|
|
|
|
| 0.084 | 82.747 | 1.319e+06 | 1.35e+02 | 0.000 | 0.16 | V |
|
|
|
|
| 0.085 | 83.678 | 1.324e+06 | 1.39e+02 | 0.000 | 0.16 | V |
|
|
|
|
| 0.086 | 84.569 | 1.329e+06 | 1.43e+02 | 0.000 | 0.17 | V |
|
|
|
|
| 0.087 | 85.502 | 1.334e+06 | 1.48e+02 | 0.000 | 0.18 | V |
|
|
|
|
| 0.088 | 86.424 | 1.339e+06 | 1.53e+02 | 0.000 | 0.18 | V |
|
|
|
|
| 0.089 | 87.333 | 1.345e+06 | 1.57e+02 | 0.000 | 0.19 | V |
|
|
|
|
| 0.089 | 88.237 | 1.352e+06 | 1.63e+02 | 0.000 | 0.19 | V |
|
|
|
|
| 0.090 | 89.122 | 1.358e+06 | 1.69e+02 | 0.000 | 0.20 | V |
|
|
|
|
| 0.091 | 90.010 | 1.366e+06 | 1.76e+02 | 0.000 | 0.21 | V |
|
|
|
|
| 0.092 | 90.859 | 1.374e+06 | 1.84e+02 | 0.000 | 0.21 | V |
|
|
|
|
| 0.093 | 91.704 | 1.384e+06 | 1.93e+02 | 0.000 | 0.22 | V |
|
|
|
|
| 0.094 | 92.558 | 1.397e+06 | 2.06e+02 | 0.000 | 0.22 | V |
|
|
|
|
| 0.095 | 93.389 | 1.411e+06 | 2.21e+02 | 0.000 | 0.23 | V |
|
|
|
|
| 0.096 | 94.199 | 1.428e+06 | 2.38e+02 | 0.000 | 0.23 | V |
|
|
|
|
| 0.096 | 94.997 | 1.447e+06 | 2.56e+02 | 0.000 | 0.24 | V |
|
|
|
|
| 0.097 | 95.797 | 1.470e+06 | 2.82e+02 | 0.000 | 0.24 | V |
|
|
|
|
| 0.098 | 96.732 | 1.508e+06 | 3.21e+02 | 0.000 | 0.25 | V |
|
|
|
|
| 0.099 | 97.668 | 1.554e+06 | 3.66e+02 | 0.000 | 0.25 | V |
|
|
|
|
| 0.100 | 98.641 | 1.607e+06 | 4.15e+02 | 0.000 | 0.26 | V |
|
|
|
|
| 0.101 | 99.454 | 1.718e+06 | 5.22e+02 | 0.000 | 0.26 | V |
|
|
|
|
| 0.101 | 99.765 | 1.847e+06 | 6.50e+02 | 0.000 | 0.26 | V |
|
|
|
|
|
|
|
|
Automatic V/P switch-over point reached. Switching to pressure control.
|
|
|
|
|
|
|
|
| 0.101 | 99.842 | 1.912e+06 | 7.16e+02 | 0.000 | 0.27 | V/P |
|
|
|
|
| 0.102 | 100.000 | 1.905e+06 | 1.18e+03 | 0.000 | 0.27 | Filled|
|
|
|
|
|----------------------------------------------------------------------|
|
|
|
|
|
|
|
|
End of filling phase results summary :
|
|
|
|
|
|
|
|
Current time from start of cycle = 0.1016 s
|
|
|
|
Total mass = 0.0153 kg
|
|
|
|
Frozen volume = 0.2658 %
|
|
|
|
Injection pressure = 1.9045E+06 Pa
|
|
|
|
Maximum Clamp force - during filling = 1176.1511 N
|
|
|
|
Time at velocity/pressure switch-over = 0.1014 s
|
|
|
|
Injection pressure at velocity/pressure switch-over= 1.9115E+06 Pa
|
|
|
|
Volume filled at velocity/pressure switch-over = 99.8424 %
|
|
|
|
|
|
|
|
|
|
|
|
End of filling. Packing will now commence.
|
|
|
|
|
|
|
|
|
|
|
|
Pack Analysis
|
|
|
|
|----------------------------------------------------------------------|
|
|
|
|
| Time | Packing | Inj Press | Clamp F | Part Mass| Frozen | Status|
|
|
|
|
| (s) | (%) | (Pa) | (N) | (kg) | Vol (%)| |
|
|
|
|
|----------------------------------------------------------------------|
|
|
|
|
| 0.102 | 0.00 | 1.877e+06 | 1.54e+03 | 1.53e-02 | 0.27 | P |
|
|
|
|
| 0.105 | 0.00 | 1.765e+06 | 1.65e+03 | 1.53e-02 | 0.28 | P |
|
|
|
|
| 0.111 | 0.00 | 1.529e+06 | 1.50e+03 | 1.53e-02 | 0.30 | P |
|
|
|
|
| 0.116 | 0.01 | 1.529e+06 | 1.46e+03 | 1.53e-02 | 0.32 | P |
|
|
|
|
| 0.134 | 0.01 | 1.529e+06 | 1.45e+03 | 1.53e-02 | 0.38 | P |
|
|
|
|
| 0.202 | 0.04 | 1.529e+06 | 1.46e+03 | 1.53e-02 | 0.67 | P |
|
|
|
|
| 0.303 | 0.08 | 1.529e+06 | 1.45e+03 | 1.54e-02 | 1.35 | P |
|
|
|
|
| 0.454 | 0.15 | 1.529e+06 | 1.47e+03 | 1.54e-02 | 2.52 | P |
|
|
|
|
| 0.681 | 0.24 | 1.529e+06 | 1.49e+03 | 1.54e-02 | 3.88 | P |
|
|
|
|
| 1.021 | 0.38 | 1.529e+06 | 1.49e+03 | 1.54e-02 | 5.42 | P |
|
|
|
|
| 1.532 | 0.59 | 1.529e+06 | 1.49e+03 | 1.55e-02 | 7.28 | P |
|
|
|
|
| 2.298 | 0.91 | 1.529e+06 | 1.48e+03 | 1.55e-02 | 9.41 | P |
|
|
|
|
| 3.446 | 1.39 | 1.529e+06 | 1.48e+03 | 1.56e-02 | 12.02 | P |
|
|
|
|
| 5.170 | 2.10 | 1.529e+06 | 1.41e+03 | 1.57e-02 | 15.35 | P |
|
|
|
|
| 7.170 | 2.93 | 1.529e+06 | 1.39e+03 | 1.57e-02 | 19.10 | P |
|
|
|
|
| 9.170 | 3.76 | 1.529e+06 | 2.10e-11 | 1.57e-02 | 23.11 | P |
|
|
|
|
| 10.101 | 4.15 | 1.529e+06 | 2.10e-11 | 1.57e-02 | 24.62 | P |
|
|
|
|
| 10.103 | 4.15 | 1.338e+06 | 1.83e-11 | 1.57e-02 | 24.62 | P |
|
|
|
|
| 10.108 | 4.15 | 5.735e+05 | 7.86e-12 | 1.57e-02 | 24.63 | P |
|
|
|
|
| 10.111 | 4.15 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 24.64 | P |
|
|
|
|
| 10.126 | 4.16 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 24.67 | P |
|
|
|
|
| 10.186 | 4.18 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 24.77 | P |
|
|
|
|
| 10.426 | 4.28 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 25.14 | P |
|
|
|
|
| 11.386 | 4.68 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 26.50 | P |
|
|
|
|
| 13.195 | 5.43 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 28.82 | P |
|
|
|
|
| 15.195 | 6.26 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 31.23 | P |
|
|
|
|
| 17.195 | 7.09 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 33.55 | P |
|
|
|
|
| 19.195 | 7.92 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 35.83 | P |
|
|
|
|
| 21.195 | 8.75 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 38.10 | P |
|
|
|
|
| 23.195 | 9.58 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 40.41 | P |
|
|
|
|
| 25.195 | 10.41 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 42.83 | P |
|
|
|
|
| 27.195 | 11.24 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 45.34 | P |
|
|
|
|
| 29.195 | 12.07 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 47.86 | P |
|
|
|
|
| 31.195 | 12.90 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 50.35 | P |
|
|
|
|
| 33.195 | 13.73 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 52.62 | P |
|
|
|
|
| 35.195 | 14.56 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 54.82 | P |
|
|
|
|
| 37.195 | 15.39 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 57.02 | P |
|
|
|
|
| 39.195 | 16.22 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 59.30 | P |
|
|
|
|
| 41.195 | 17.05 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 61.70 | P |
|
|
|
|
| 43.195 | 17.88 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 64.22 | P |
|
|
|
|
| 45.195 | 18.71 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 66.83 | P |
|
|
|
|
| 47.195 | 19.54 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 69.45 | P |
|
|
|
|
| 49.195 | 20.37 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 71.95 | P |
|
|
|
|
| 51.195 | 21.20 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 74.47 | P |
|
|
|
|
| 53.195 | 22.03 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 77.13 | P |
|
|
|
|
| 55.195 | 22.86 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 79.93 | P |
|
|
|
|
| 57.195 | 23.69 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 82.89 | P |
|
|
|
|
| 59.195 | 24.52 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 86.71 | P |
|
|
|
|
| 61.195 | 25.35 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 91.39 | P |
|
|
|
|
| 63.195 | 26.18 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 93.27 | P |
|
|
|
|
| 65.195 | 27.01 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 94.68 | P |
|
|
|
|
| 67.195 | 27.84 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 95.87 | P |
|
|
|
|
| 69.195 | 28.67 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 96.92 | P |
|
|
|
|
| 71.195 | 29.50 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 97.85 | P |
|
|
|
|
| 73.195 | 30.33 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 98.71 | P |
|
|
|
|
| 75.195 | 31.16 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 99.43 | P |
|
|
|
|
| 77.195 | 31.99 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 99.92 | P |
|
|
|
|
| 79.195 | 32.82 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 81.195 | 33.65 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 83.195 | 34.48 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 85.195 | 35.31 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 87.195 | 36.14 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 89.195 | 36.97 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 91.195 | 37.80 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 93.195 | 38.63 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 95.195 | 39.46 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 97.195 | 40.29 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 99.195 | 41.12 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 101.195 | 41.95 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 103.195 | 42.78 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 105.195 | 43.61 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 107.195 | 44.44 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 109.195 | 45.27 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 111.195 | 46.10 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 113.195 | 46.93 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 115.195 | 47.76 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 117.195 | 48.59 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 119.195 | 49.42 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 121.195 | 50.25 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 123.195 | 51.08 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 125.195 | 51.91 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 127.195 | 52.74 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 129.195 | 53.57 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 131.195 | 54.40 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 133.195 | 55.23 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 135.195 | 56.06 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 137.195 | 56.89 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 139.195 | 57.72 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 141.195 | 58.54 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 143.195 | 59.37 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 145.195 | 60.20 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 147.195 | 61.03 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 149.195 | 61.86 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 151.195 | 62.69 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 153.195 | 63.52 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 155.195 | 64.35 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 157.195 | 65.18 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 159.195 | 66.01 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 161.195 | 66.84 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 163.195 | 67.67 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 165.195 | 68.50 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 167.195 | 69.33 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 169.195 | 70.16 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 171.195 | 70.99 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 173.195 | 71.82 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 175.195 | 72.65 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 177.195 | 73.48 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 179.195 | 74.31 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 181.195 | 75.14 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 183.195 | 75.97 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 185.195 | 76.80 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 187.195 | 77.63 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 189.195 | 78.46 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 191.195 | 79.29 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 193.195 | 80.12 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 195.195 | 80.95 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 197.195 | 81.78 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 199.195 | 82.61 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 201.195 | 83.44 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 203.195 | 84.27 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 205.195 | 85.10 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 207.195 | 85.93 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 209.195 | 86.76 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 211.195 | 87.59 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 213.195 | 88.42 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 215.195 | 89.25 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 217.195 | 90.08 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 219.195 | 90.91 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 221.195 | 91.74 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 223.195 | 92.57 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 225.195 | 93.40 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 227.195 | 94.23 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 229.195 | 95.06 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 231.195 | 95.89 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 233.195 | 96.72 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 235.195 | 97.55 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 237.195 | 98.38 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 239.195 | 99.21 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
| 241.101 | 100.00 | 0.000e+00 | 0.00e+00 | 1.57e-02 | 100.00 | P |
|
|
|
|
|----------------------------------------------------------------------|
|
|
|
|
|
|
|
|
End of packing phase results summary :
|
|
|
|
|
|
|
|
Current time from start of cycle = 241.1014 s
|
|
|
|
Total mass = 0.0157 kg
|
|
|
|
Frozen volume = 100.0000 %
|
|
|
|
Injection pressure = 0.0000 Pa
|
|
|
|
|
|
|
|
Volumetric shrinkage - maximum = 17.1963 %
|
|
|
|
Volumetric shrinkage - minimum = 0.6558 %
|
|
|
|
Volumetric shrinkage - average = 13.0034 %
|
|
|
|
Volumetric shrinkage - root-mean-square deviation = 5.4435 %
|
|
|
|
|
|
|
|
Percentage of model affected by more than nominal sink marks = 6.64 %
|
|
|
|
|
|
|
|
Beginning weld line/air trap analysis...
|
|
|
|
|
|
|
|
Preparing output data...
|
|
|
|
Finished preparing output data
|
|
|
|
Weld line/air trap analysis completed
|
|
|
|
|
|
|
|
Execution time
|
|
|
|
Analysis commenced at Sat Jun 8 19:47:27 2024
|
|
|
|
Analysis completed at Sat Jun 8 19:55:36 2024
|
|
|
|
CPU time used 2513.25 s
|
|
|
|
equivalent to 0 hr, 41 min
|
|
|
|
Elapsed wall clock time 489.00 s
|
|
|
|
equivalent to 0 hr, 8 min
|
|
|
|
C:\Program Files\Autodesk\Moldflow Insight 2023\bin\warp3d -gpu -mes raw -interface 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study~3 -output 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study~13 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study.udm
|
|
|
|
Copyright Autodesk, Inc. All rights reserved.
|
|
|
|
(C)2009 2010 2011 2012 2013 2014 2015 2016
|
|
|
|
(C)2017 2018 2019 2020 2021 2022
|
|
|
|
Portions of this software are covered by U.S. Patent Numbers 5,287,408 and 6,096,088.
|
|
|
|
|
|
|
|
|
|
|
|
Warp Analysis
|
|
|
|
|
|
|
|
|
|
|
|
Version: Autodesk Moldflow Insight 2023 (Build 211)
|
|
|
|
64-bit build
|
|
|
|
|
|
|
|
Analysis running on host: mateng04
|
|
|
|
Operating System: Windows 10 ( Build 19045 )
|
|
|
|
Processor type: GenuineIntel Intel64 Family 6 Model 158 Stepping 10 ~2904 MHz
|
|
|
|
Number of Processors: 6
|
|
|
|
Total Physical Memory: 16124 MBytes
|
|
|
|
|
|
|
|
|
|
|
|
Analysis commenced at Sat Jun 8 19:55:39 2024
|
|
|
|
|
|
|
|
Attempting to acquire the required solver license at: Sat Jun 8 19:55:40 2024
|
|
|
|
Solver license acquired successfully at: Sat Jun 8 19:55:40 2024
|
|
|
|
|
|
|
|
|
|
|
|
Model file name: 00000849_2c1efcc32d094e9fb9e1a88e_step_009_study.udm
|
|
|
|
|
|
|
|
Reading solver parameters...
|
|
|
|
|
|
|
|
Reading mechanical property and shrinkage data...
|
|
|
|
Residual stress model is used.
|
|
|
|
|
|
|
|
Defining anchor plane...
|
|
|
|
Number of separate cavities = 1
|
|
|
|
|
|
|
|
Some elements have been upgraded to higher-order elements.
|
|
|
|
Number of original nodes: 24418
|
|
|
|
Number of midside nodes added: 158969
|
|
|
|
Total number of nodes in Warp analysis: 183387
|
|
|
|
Estimated memory requirement: 720 Mbytes.
|
|
|
|
|
|
|
|
Writing input file for structural analysis program...
|
|
|
|
|
|
|
|
Launching structural analysis program...
|
|
|
|
|
|
|
|
Reading structural analysis input file...
|
|
|
|
...finished reading structural analysis input file.
|
|
|
|
|
|
|
|
Matrix solver used = AMG
|
|
|
|
Number of threads for parallelization = Automatic
|
|
|
|
Initial number of threads used in the analysis = 6
|
|
|
|
|
|
|
|
Beginning load incrementation loop...
|
|
|
|
|
|
|
|
Setting structure information...
|
|
|
|
|
|
|
|
Assembling stiffness matrix...
|
|
|
|
|
|
|
|
Solving finite element static equilibrium equations...
|
|
|
|
|
|
|
|
--------------------------------------------------------
|
|
|
|
Kstep Kstra Nref Nite Node Ipos Rfac Displacement
|
|
|
|
--------------------------------------------------------
|
|
|
|
1 1 1 0 25554 2 1.000e+00 6.152e-01
|
|
|
|
|
|
|
|
|
|
|
|
Support reactions at last step (unit: Newtons, G = Global, L = Local, Showing the first 100 lines)
|
|
|
|
|
|
|
|
Node G/L Trans-X Trans-Y Trans-Z
|
|
|
|
-----------------------------------------------------
|
|
|
|
199 L 0.0000e+00 0.0000e+00 1.1613e-06
|
|
|
|
208 L 0.0000e+00 -2.4252e-06 -2.7874e-06
|
|
|
|
344 L 3.5887e-06 -2.6989e-06 -4.1367e-06
|
|
|
|
-----------------------------------------------------
|
|
|
|
Sum G 7.6685e-06 -1.0565e-07 -3.6779e-06
|
|
|
|
|
|
|
|
|
|
|
|
Elapsed wall clock time in structural analysis: 25.51 secs.
|
|
|
|
|
|
|
|
|
|
|
|
Writing result file...
|
|
|
|
|
|
|
|
Minimum/maximum displacements at last step (unit: mm):
|
|
|
|
|
|
|
|
Node Min. Node Max.
|
|
|
|
-----------------------------------------------------
|
|
|
|
Trans-X 100 -2.7849e-01 5239 2.1824e-01
|
|
|
|
Trans-Y 344 -2.8428e-01 145 3.0917e-01
|
|
|
|
Trans-Z 38 -4.2858e-01 5280 4.5818e-01
|
|
|
|
-----------------------------------------------------
|
|
|
|
|
|
|
|
|
|
|
|
Execution time
|
|
|
|
Analysis commenced at Sat Jun 8 19:55:39 2024
|
|
|
|
Analysis completed at Sat Jun 8 19:56:15 2024
|
|
|
|
CPU time used 122.45 s
|
|
|
|
equivalent to 0 hr, 2 min
|
|
|
|
Elapsed wall clock time 36.00 s
|
|
|
|
|
|
|
|
Warp analysis has completed successfully. |