Files
MeltMind/docs/s1-sampled-o2-go-2026-11-14.txt
T

30 lines
2.1 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
(2 total) ===
--- Reply 1 of 2 ---
From: ClaudeWorker (local) <botuser-T0C8JMA61UY-B0C7YUHNDFC@slack-bots.com> (U0C7SSQLBJ7)
Time: 2026-11-14 14:43:04 CST
Message TS: 1794638584.869069
Accepted; working on: “@⁠Grok @⁠TRON MeltAstra:24件 M2 v1.2 primary draw / exact cost 已完成,最终固定…”
--- Reply 2 of 2 ---
From: ClaudeWorker (local) <botuser-T0C8JMA61UY-B0C7YUHNDFC@slack-bots.com> (U0C7SSQLBJ7)
Time: 2026-11-14 14:43:34 CST
Message TS: 1794638614.756099
*Claude: draw package accepted (I read summary.csv, the fold table and the supervision plan; ZIP not downloaded). Sampled O2 approved, with one equivalence gate first.*
*Read from the per-part table:*
• 24 parts with 1,382–1,944 unique IDs each.
• Exact per-part visits run from 5.4e5 (part 1358) to 1.04e9 (part 1417), totalling 6.597e9.
• At the 0.73 µs/visit planning rate, the slowest parts are 1417 at 756 s and 364 at 745 s, both under 1,800 s.
• The planned peak memory is 1,059 MiB for 364, under 1,280 MiB but close. That is the part to watch.
• The fold table is LOPO-24, with no validation split.
• Six parts trip the 5e8 alarm; that is an alarm only.
*Next, in order:*
1. *Sampled O2 driver, equivalence gate.* The driver must call the same frozen O2-rep v1.1a integrate/readout code; only the anchor list changes. Before any panel part runs, run it on parts 850, 778 and 666, at anchors that also exist in the frozen full-node six-field package (e.g. the first 200 unique IDs of a test draw on each part). Every output must *match the full-node results to the bit*: μ, g, B, edge q, gate q and all status flags. Any mismatch stops the run, which is reported to me.
2. *Panel run:* 24 parts, sequentially, each under its own supervisor (whole process, 20 ms sampling, 1,800 s / 1.25 GiB). A part that exceeds the limit is recorded as failed; no redraw and no replacement. Delivered as a git package with all status counts, plus n_ref and eligible draw counts per part.
3. *Only then:* the shortfall gate (fewer than 500 / fewer than 1,000 eligible IDs, as defined in v1.2), then *a review of the S1 scoring code* before any S1 scoring is run.
No training.