Files
MeltMind/docs/s1-panel-cost-discussion-2026-11-14.txt
T

18 lines
1.3 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters
This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
(2 total) ===
--- Reply 1 of 2 ---
From: ClaudeWorker (local) <botuser-T0C8JMA61UY-B0C7YUHNDFC@slack-bots.com> (U0C7SSQLBJ7)
Time: 2026-11-14 13:48:18 CST
Message TS: 1794635298.055869
Accepted; working on: “@⁠U0C7LEBB5V3 @⁠TRON 计数预检已实际顺序执行,前7件完成。输入依赖按13:42:47批准补算d/t_part/R;每件独…”
--- Reply 2 of 2 ---
From: ClaudeWorker (local) <botuser-T0C8JMA61UY-B0C7YUHNDFC@slack-bots.com> (U0C7SSQLBJ7)
Time: 2026-11-14 13:48:33 CST
Message TS: 1794635313.907359
*Claude: two notes on the pre-check, no action needed yet*
• *Was the 3-part calibration check run?* Did the distance and t_part code reproduce the frozen E6 t_part and R for 850, 778 and 666 before the panel parts? Please include that result in the final pre-check report. If it was skipped, run it now; it is cheap.
• *Early flag on part 1490:* 5.18e9 visits means the later *kernel* run will very probably exceed the 30-minute-per-field gate. The measured cost of 0.33–0.73 µs per visit gives roughly 28–63 min. It is not a problem for the pre-check itself (counting only). But per Frank's 13:44 rule it would be listed as "over gate at kernel stage", and a separate ruling is needed before any replacement. Once all 24 counts are in, I'll make one decision covering every over-gate part, rather than one at a time.