Decision record s7: stage close after S3-A, next route and stop conditions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
cc102bad23
commit
764268d966
1 file changed
+21
@@ -50,3 +50,24 @@ S3-A runs as approved. In parallel, the route-A falsification tests (O-vol oracl
|
||||
- If positive unfilled volume remains with no reachable front, record it as blocked. Do not drop the d = 0 mass and do not declare the part filled.
|
||||
- This yields a conservative graph-ordering prior. To call it a Hele-Shaw discretisation, the edge conductance must state how it includes face scale, length, thickness and viscosity, and what it means under remeshing. A truly closed cavity with trapped air needs a gas-pressure or venting model.
|
||||
- With one gate, linear conductance and a uniform front pressure, scaling Q only changes the clock. The new, testable information is how flow splits between branches, and the resulting order.
|
||||
|
||||
## 7. Stage close (after S3-A, MeltMind 1e49c157, Mold reading)
|
||||
**Constrained (tested, negative or no gain, within the limits stated):**
|
||||
- O2 local-tensor readings as fill-time predictors on Greif v5. S1: no coverage support for the node invariants. S2: the edge readings were harmful in the neural backbone (-1.29 %). S3-A: no meaningful gain inside R2 (E4 +0.36 %, CI [-0.18, +0.90] %; G2 +0.10 %, descriptive). The line is closed for this target and corpus.
|
||||
- The neural whole-part backbone as configured (width 128, 42 epochs, direct t*). It fails the gate against R2, the gap is mostly shape (D3), and longer training or scale calibration will not close it (D2/D3).
|
||||
- A stronger distance weighting f = D_w^2 (20.2 %, against 9.1 % for D_w^1), for this graph approximation and clock only.
|
||||
- Volume-consistent remapping of R2: no net gain (-0.09 %, CI includes 0).
|
||||
|
||||
**Measured references (oracles; not deployable, not floors):** true full-domain order plus training clock gives 1.48 %. The LOG time map is within 1 pp of linear for 411/624 parts, with a tail up to 34 pp. Part 996 shows that the last-filled timing can sit in the post-switch-over phase.
|
||||
|
||||
**Untested:** O1 (region or branch organisation with interfaces); flow-competition (branch-split) ordering; continuous eikonal versus Dijkstra; process, gate and material variation (impossible on public data); acceptance targets (asked through TRON, not yet answered); whether neural models do better with far more data.
|
||||
|
||||
**Next route: the filling order from flow competition, S3-B(a) then (b).** CPU only, no training without a separate contract.
|
||||
- (a) A graph filling prior (Mold's definition; conductance g_ij = dual-volume/L_ij^2 x D_w^2, fixed before the run). Scored like the naive batch against B0_DW1 and R2.
|
||||
- (b) Only if (a) passes: its order as a single extra R2 feature, using the six-region table against R2.
|
||||
|
||||
**Stop conditions (fixed now):**
|
||||
1. (a) is ill-posed in practice: "blocked" or unfinished on more than 5 % of the 617 parts, or more than 5 % of the volume. Report and stop the line.
|
||||
2. (a) does not beat B0_DW1 on both component-mean relative L2 (paired CI upper bound below 0 in the B0_DW1-to-(a) direction counts as "not better") and Kendall tau-b. Stop the physics-prior line; do not tune the conductance.
|
||||
3. (b) lands in "no meaningful gain" or worse. The cheap physics-prior feature route ends.
|
||||
4. If 2 or 3 triggers, the public-data stage for fill time is closed: cheap geometric and physics priors at this data scale do not improve on R2. Effort then moves to the in-house CAE stage (gate-selection pairs, process variation, the acceptance targets), with O1 designed against those targets rather than against Greif v5 fill time.
|
||||
Reference in new issue
Block a user