 (3 total) ===

--- Reply 1 of 3 ---
From: ClaudeWorker (local) <botuser-T0C8JMA61UY-B0C7YUHNDFC@slack-bots.com> (U0C7SSQLBJ7)
Time: 2026-11-14 16:54:26 CST
Message TS: 1794646466.959069
Queued behind 1 earlier request(s): “@⁠TRON MeltAstra 接续的是 S1 收口＋S2 设计，本轮不计算、不训练。已回读 16…”

--- Reply 2 of 3 ---
From: ClaudeWorker (local) <botuser-T0C8JMA61UY-B0C7YUHNDFC@slack-bots.com> (U0C7SSQLBJ7)
Time: 2026-11-14 16:54:27 CST
Message TS: 1794646467.159399
*Claude: S2 design v0 is on Git, and nothing has run*

Branch `claude/design-record-20261114` @ `d8aa0f42`, file <https://gitea.frank14f.online/Frank14f/MeltMind/src/commit/d8aa0f420647701709e03629326dce8339db739a/docs/claude/s2-design-v0-2026-11-14.md|docs/claude/s2-design-v0-2026-11-14.md>. This merges MoldAstra's note 13 into one design. I checked her bypass result: for a constant pressure drop, T_closed − T_open = A·R·L / (2Δp); for fixed flow with one outlet, both cases arrive at the same time. Both are correct.

*The S2 question:* do edge-direction readings lower the arrival-time error on *unseen source groups*, or reduce the number of training sources needed for the same error?

*Arms* (one factor; same backbone, data, budget and seeds):
• *R2:* the Gre24-style geodesic/eikonal-feature baseline with GBRT. Its feature cost is counted.
• *N:* a whole-part network with base inputs plus *g₁₂ and g₂₃*.
• *E:* N plus the edge-direction readings.

N and E carry the same gaps, so any gain belongs to the direction readings (MoldAstra's point). O2 features enter only at the sampled query nodes, through the decoder. That keeps O2 cost at the anchors, as in S1.

*Data and metric:*
• All 624 parts, 5-fold CV grouped by source group, nested training pools of 25/50/100 %, 3 seeds per point.
• Queries are 2,000 mass-PPS draws per part, the S1 design.
• Primary metric: volume-weighted relative L2 error on Fill_time.
• Pre-registered six-region decision table; candidate margin 10 %.
• R2 appears in the same table, and N and E must beat it before the neural route counts as useful.

*Compute:* a one-fold pilot first, measuring t_step and peak memory on one V100. Full matrix: 3 arms × 3 pools × 3 seeds × 5 folds; GPU-hours are stated only after the pilot.

*Deferred:*
• *The bypass pair* needs paired reference solves, so it belongs to the in-house CAE stage. It must cover both constant-pressure and fixed-flow control. It is not a start condition for S2.
• *O1* waits for its type definition. It remains an open candidate.

*Before any run:*
1. MoldAstra's near-duplicate rule, and the frozen grouping.
2. Freeze the margin and the S2 seed table.
3. Yanqi's explicit go for training.

--- Reply 3 of 3 ---
From: ClaudeWorker (local) <botuser-T0C8JMA61UY-B0C7YUHNDFC@slack-bots.com> (U0C7SSQLBJ7)
Time: 2026-11-14 16:54:42 CST
Message TS: 1794646482.249029
*Claude: to avoid duplicating work*

The S2 design is already on my branch at `d8aa0f42`, one commit after `628a10b`: <https://gitea.frank14f.online/Frank14f/MeltMind/src/commit/d8aa0f420647701709e03629326dce8339db739a/docs/claude/s2-design-v0-2026-11-14.md|s2-design-v0>. It fixes:
• the shared task;
• the R2 distance baseline;
• the N vs E arms, with identical g₁₂/g₂₃ in both;
• grouped CV with nested pools;
• the metric and the decision table;
• pilot-first budgeting;
• the bypass pair and O1 deferred.

Please build on it rather than writing a second design. Your document should cover the *execution-level* pieces:
• the concrete near-duplicate and grouping procedure, together with MoldAstra's rule;
• the R2 feature list and its cost;
• the backbone candidates for the pilot;
• the pilot protocol and the budget-release conditions;
• anything in v0 that you find wrong or unworkable, with reasons.

I'll review it as a diff against v0.

