ClaudeandClaude Opus 5.5
104f74632f
- test_exchange_window and test_raw_exchange_gpu fine(): dense root becomes a (12, 8) blocked root (fine(None) stays only for the dense reference test that D2 retires); - jets: G1/G3 compare blocked layouts against the FINE_BLOCKS[0] reference (blocked root); the dense run is a separate leg D2 removes; G2 legacy actuation vs Jet on the blocked reference; CPU fixtures use a blocked root; - test_refinement_blocked_fine.raw reads every level through its layout; - test_fine_surface_gpu: new test_fine_surface_blocked_matches_uniform_four_hops (fine ROI after each of four hops vs the uniform 48^2 solver with the same tolerances, blowing/suction mass sign from raw exchange, zero actuation == passive bit for bit); the cross-interface donor rejection passes tiles. The dense hook/ledger/audit probes in test_fine_surface_four_hops and the dense SoA fault tests stay until D2 retires them by name. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
269 lines
14 KiB
Python
269 lines
14 KiB
Python
"""GPU gates for raw exchange. Run explicitly; requires PyCUDA and CUDA.
|
|
|
|
Independent census reads actual staged incoming/outgoing populations, including
|
|
non-body ACTIVE-boundary flux, then checks postcollision fluid momentum/mass.
|
|
This is a discrete implementation gate, NOT a physical nozzle-load validation.
|
|
"""
|
|
from dataclasses import replace
|
|
import unittest
|
|
import numpy as np
|
|
import pycuda.driver as cuda
|
|
|
|
from CelerisLab.body.geometry.circle import CircleGeometry
|
|
from CelerisLab.body.objects import SimObject
|
|
from CelerisLab.body.jets import Jet, Tube, Parallel
|
|
from CelerisLab.config import LBMConfig
|
|
from CelerisLab.cuda.context import CudaContext
|
|
from CelerisLab.lbm.refinement_stepper import FixedPatchStepper
|
|
from CelerisLab.lbm.descriptors import D2Q9_EX, D2Q9_EY, SOLID
|
|
|
|
CX, CY = np.asarray(D2Q9_EX), np.asarray(D2Q9_EY)
|
|
OPP = np.array([np.flatnonzero((CX == -x) & (CY == -y))[0] for x, y in zip(CX, CY)])
|
|
W = np.array([4/9] + [1/9]*4 + [1/36]*4, np.float32)
|
|
CFG = LBMConfig(nx=32, ny=24, viscosity=.1)
|
|
BOUNDS = (8, 6, 24, 18)
|
|
|
|
|
|
def circle():
|
|
return SimObject(17, geometry=CircleGeometry(16., 12., 2.15), center=(16., 12.), radius=2.15)
|
|
|
|
|
|
def jet():
|
|
# Asymmetric aperture avoids hiding exchange errors by paired-jet cancellation.
|
|
return Jet(Tube((16., 12.), 0., 3., .7), Parallel(0.), amplitude=0.)
|
|
|
|
|
|
def state(shape, ux=.013):
|
|
cu = CX[:, None, None]*ux
|
|
values = W[:, None, None]*(1+3*cu+4.5*cu*cu-1.5*ux*ux)
|
|
return np.broadcast_to(values, shape).astype(np.float32).copy()
|
|
|
|
|
|
def download(pointer, shape, dtype=np.float32):
|
|
result = np.empty(shape, dtype)
|
|
cuda.memcpy_dtoh(result, pointer)
|
|
return result
|
|
|
|
|
|
def totals(g, leaf):
|
|
values = g[:, leaf].astype(np.float64)
|
|
return np.array([(values*CX[:, None]).sum(), (values*CY[:, None]).sum(), values.sum()])
|
|
|
|
|
|
def census(run, index, buffer):
|
|
"""Independent incoming/outgoing face census on ACTIVE fluid cells.
|
|
|
|
Reads the receiver's actual block window, not a freshly gathered owner image
|
|
(that would erase BFL/restriction staging). Classifies external flux solely
|
|
from geometry, without consulting raw observation arrays.
|
|
"""
|
|
level = run._levels[index]
|
|
layout, b = level.layout, level.boundary
|
|
g = download(buffer, layout.blocked_shape)
|
|
dense = layout.to_dense(g)
|
|
leaf = run._leaf[index]
|
|
ny, nx = leaf.shape
|
|
solid = (b.host.flags.reshape(ny, nx) & SOLID) != 0
|
|
y, x = np.nonzero(leaf)
|
|
owner = layout.owner[y, x].astype(np.intp)
|
|
cells = int(np.prod(layout.local_shape))
|
|
block, cell = np.divmod(owner, cells)
|
|
flat = g.reshape(layout.nblocks, 9, cells)
|
|
external = np.zeros(3, np.float64)
|
|
for q, (cx, cy) in enumerate(zip(CX, CY)):
|
|
sy, sx = y-cy, x-cx
|
|
incoming = flat[block, q, cell-cy*layout.local_shape[1]-cx].astype(np.float64)
|
|
entering = ~leaf[sy, sx] & ~solid[sy, sx]
|
|
external += np.array([cx, cy, 1])*incoming[entering].sum()
|
|
dy, dx = y+cy, x+cx
|
|
leaving = ~leaf[dy, dx] & ~solid[dy, dx]
|
|
outgoing = flat[block, q, cell].astype(np.float64)
|
|
external -= np.array([cx, cy, 1])*outgoing[leaving].sum()
|
|
receiver, direction, _, _, rx, ry, _, _ = b.host.curved_host
|
|
owner = layout.owner.ravel()[receiver].astype(np.intp)
|
|
block, cell = np.divmod(owner, cells)
|
|
a = flat[block, direction, cell].astype(np.float64)
|
|
source = cell+CY[direction]*layout.local_shape[1]+CX[direction]
|
|
incoming = flat[block, OPP[direction], source].astype(np.float64)
|
|
jx, jy = CX[direction]*(a+incoming), CY[direction]*(a+incoming)
|
|
independent = np.column_stack((jx, jy, rx*jy-ry*jx, incoming-a))
|
|
return totals(dense, leaf), external, independent
|
|
|
|
|
|
|
|
def fine(block):
|
|
"""Two-level circle+jet construction on BOUNDS, all-blocked with a (12, 8) root tile;
|
|
block None is the dense route (dense reference test only, retired with the dense route)."""
|
|
return dict(refinements=[BOUNDS], level_blocks=[None if block is None else (12, 8), block],
|
|
level_objects=[(), (circle(),)], level_jets=[(), (jet(),)])
|
|
|
|
class RawExchangeGPU(unittest.TestCase):
|
|
def test_row_ledger_interval_jet_switch_and_no_population_effect(self):
|
|
with CudaContext(0) as ctx:
|
|
for block in ((32, 40), (16, 20), (8, 10)):
|
|
with FixedPatchStepper(CFG, context=ctx, **fine(block), observe_raw_exchange=True) as measured, \
|
|
FixedPatchStepper(CFG, context=ctx, **fine(block)) as plain:
|
|
arrays = [state(l.shape) for l in measured._levels]
|
|
measured.initialize(*arrays)
|
|
plain.initialize(*arrays)
|
|
b = measured._level_boundaries[1]
|
|
count = len(b.tables['cell'])
|
|
kernel = measured._levels[1].kernel
|
|
samples = []
|
|
|
|
def audited_step(src, dst, *args, **kw):
|
|
measured._stream.synchronize()
|
|
before, external, independent = census(measured, 1, src)
|
|
raw = download(b.last_raw, (count, 4))
|
|
np.testing.assert_allclose(raw, independent, rtol=2e-6, atol=2e-7)
|
|
kernel(src, dst, *args, **kw)
|
|
measured._stream.synchronize()
|
|
after = measured._levels[1].layout.to_dense(
|
|
download(dst, measured._levels[1].layout.blocked_shape))
|
|
change = totals(after, measured._leaf[1])-before
|
|
expected = external + np.array([-raw[:, 0].astype(float).sum(),
|
|
-raw[:, 1].astype(float).sum(),
|
|
raw[:, 3].astype(float).sum()])
|
|
np.testing.assert_allclose(change, expected, rtol=2e-4, atol=8e-5)
|
|
samples.append(raw.copy())
|
|
measured._levels[1].kernel = audited_step
|
|
for speed in (0., .002, -.001, 0.):
|
|
measured.set_jet_amplitude(0, speed)
|
|
plain.set_jet_amplitude(0, speed)
|
|
samples.clear()
|
|
measured.step()
|
|
plain.step()
|
|
for a, e in zip(measured.download(), plain.download()):
|
|
np.testing.assert_array_equal(a, e)
|
|
integral = download(b.interval_integral, (count, 4), np.float64)
|
|
expected = sum(s.astype(float)*[.25, .25, .125, .25] for s in samples)
|
|
np.testing.assert_array_equal(integral, expected)
|
|
last = download(b.last_raw, (count, 4))
|
|
np.testing.assert_array_equal(last, samples[-1])
|
|
obs = measured.read_raw_exchange(0)
|
|
assert obs['sample_count'] == 2
|
|
assert b.tables['aperture'].any()
|
|
measured.step(0)
|
|
np.testing.assert_array_equal(measured.read_raw_exchange(0)['total']['impulse'],
|
|
obs['total']['impulse'])
|
|
|
|
def test_dense_fine_storage_reference(self):
|
|
"""Same fine resolution/initial data with dense storage: a numerical
|
|
reference for cut-link rows, not a uniform-whole-domain convergence study."""
|
|
with CudaContext(0) as ctx:
|
|
with FixedPatchStepper(CFG, context=ctx, **fine(None)) as dense, \
|
|
FixedPatchStepper(CFG, context=ctx, **fine((16, 20)), observe_raw_exchange=True) as blocked:
|
|
arrays = [state(l.shape) for l in blocked._levels]
|
|
dense.initialize(*arrays)
|
|
blocked.initialize(*arrays)
|
|
for speed in (0., .002, 0.):
|
|
dense.set_jet_amplitude(0, speed)
|
|
blocked.set_jet_amplitude(0, speed)
|
|
dense.step(); blocked.step()
|
|
for a, e in zip(blocked.download(), dense.download()):
|
|
np.testing.assert_array_equal(a, e)
|
|
count = dense._fine_curved.count
|
|
expected = download(dense._fine_curved.link_exchange_gpu, (count, 3))
|
|
actual = download(blocked._level_boundaries[1].last_raw, (count, 4))
|
|
np.testing.assert_array_equal(actual[:, :3], expected)
|
|
|
|
def test_depth_four_interval_storage_and_sampling(self):
|
|
cfg = LBMConfig(nx=48, ny=48, viscosity=.02)
|
|
obj = SimObject(0, geometry=CircleGeometry(16., 16., .5), center=(16., 16.), radius=.5)
|
|
drive = Jet(Tube((16., 16.), 0., .75, .2), Parallel(0.), amplitude=0.)
|
|
settings = dict(refinements=[[(6, 6, 26, 26)], [(20, 20, 44, 44)], [(56, 56, 72, 72)]],
|
|
level_blocks=[(4, 4)]*4, level_objects=[(), (), (), (obj,)],
|
|
level_jets=[(), (), (), (drive,)])
|
|
with CudaContext(0) as ctx:
|
|
with FixedPatchStepper(cfg, context=ctx, observe_raw_exchange=True, **settings) as run, \
|
|
FixedPatchStepper(cfg, context=ctx, **settings) as plain:
|
|
arrays = [state(l.shape, ux=0.) for l in run._levels]
|
|
run.initialize(*arrays); plain.initialize(*arrays)
|
|
b = run._level_boundaries[3]
|
|
count = len(b.tables['cell'])
|
|
kernel = run._levels[3].kernel
|
|
samples, independent_samples = [], []
|
|
def audited_step(src, dst, *args, **kw):
|
|
run._stream.synchronize()
|
|
before, external, independent = census(run, 3, src)
|
|
raw = download(b.last_raw, (count, 4))
|
|
np.testing.assert_allclose(raw, independent, rtol=2e-6, atol=2e-7)
|
|
kernel(src, dst, *args, **kw)
|
|
run._stream.synchronize()
|
|
after = run._levels[3].layout.to_dense(
|
|
download(dst, run._levels[3].layout.blocked_shape))
|
|
change = totals(after, run._leaf[3])-before
|
|
expected = external + np.array([-independent[:, 0].sum(),
|
|
-independent[:, 1].sum(), independent[:, 3].sum()])
|
|
np.testing.assert_allclose(change, expected, rtol=2e-4, atol=8e-5)
|
|
samples.append(raw)
|
|
independent_samples.append(independent)
|
|
run._levels[3].kernel = audited_step
|
|
for speed in (0., .002, 0.):
|
|
run.set_jet_amplitude(0, speed, level=3)
|
|
plain.set_jet_amplitude(0, speed, level=3)
|
|
samples.clear(); independent_samples.clear()
|
|
run.step(); plain.step()
|
|
self.assertEqual(len(samples), 8)
|
|
weights = np.array([1/64, 1/64, 1/512, 1/64])
|
|
integral = download(b.interval_integral, (count, 4), np.float64)
|
|
np.testing.assert_array_equal(integral, sum(v.astype(float)*weights for v in samples))
|
|
np.testing.assert_allclose(integral, sum(v*weights for v in independent_samples),
|
|
rtol=2e-6, atol=2e-7)
|
|
np.testing.assert_array_equal(download(b.last_raw, (count, 4)), samples[-1])
|
|
for actual, expected in zip(run.download(), plain.download()):
|
|
np.testing.assert_array_equal(actual, expected)
|
|
result = run.read_raw_exchange(0, level=3)
|
|
self.assertEqual(result['sample_count'], 8)
|
|
self.assertEqual(result['time_start'], run.step_count-1)
|
|
if run.step_count == 1:
|
|
np.testing.assert_allclose(result['total']['force'], 0, atol=2e-7)
|
|
self.assertAlmostEqual(result['total']['torque'], 0, delta=2e-7)
|
|
|
|
def test_uniform_whole_domain_fine_short_time_reference(self):
|
|
"""Same root geometry, nu and Jet speed on a whole-domain fine mesh.
|
|
Eight local hops are a short-time equivalence check, not convergence.
|
|
The test adapter only enables the standalone kernel's optional inputs.
|
|
"""
|
|
fine_cfg = replace(CFG, nx=64, ny=48, viscosity=.2)
|
|
obj = SimObject(0, geometry=CircleGeometry(31.5, 23.5, 4.3),
|
|
center=(31.5, 23.5), radius=4.3)
|
|
with CudaContext(0) as ctx:
|
|
with FixedPatchStepper(fine_cfg, context=ctx, refinements=[], level_blocks=[(8, 8)],
|
|
level_objects=[(obj,)]) as uniform, \
|
|
FixedPatchStepper(CFG, context=ctx, **fine((16, 20)), observe_raw_exchange=True) as amr:
|
|
amr.initialize(*(state(l.shape) for l in amr._levels))
|
|
uniform.initialize(state((9, 48, 64)))
|
|
b = amr._level_boundaries[1]
|
|
count = len(b.tables['cell'])
|
|
links = obj.geometry.build_cut_links(64, 48)
|
|
np.testing.assert_array_equal([v.dir for v in links], b.tables['dir'])
|
|
np.testing.assert_allclose([v.q for v in links], b.tables['q'], atol=2e-7, rtol=0)
|
|
# Same fine-grid force arms after translation to the same center: the
|
|
# single level's static BFL gets the AMR Jet column and force arms; the raw
|
|
# output pointer is substituted at launch (no stepper-side accumulation).
|
|
root = uniform._level_boundaries[0]
|
|
velocity = uniform._upload(b.tables['surface_velocity'])
|
|
root.device.update(surface_velocity=velocity, rx=uniform._upload(b.tables['rx']),
|
|
ry=uniform._upload(b.tables['ry']))
|
|
raw = uniform._allocate(count*16)
|
|
original = root.kernel
|
|
samples = []
|
|
def measured_boundary(*args, **kw):
|
|
original(*args[:10], raw, **kw) # BlockCurvedBoundary raw-exchange output
|
|
uniform._stream.synchronize()
|
|
samples.append(download(raw, (count, 4)))
|
|
root.kernel = measured_boundary
|
|
for speed in (0., .002, -.001, 0.):
|
|
amr.set_jet_amplitude(0, speed)
|
|
cuda.memcpy_htod(velocity, b.tables['surface_velocity'])
|
|
samples.clear()
|
|
amr.step(); uniform.step(2)
|
|
expected = sum(v.astype(float)*[.25, .25, .125, .25] for v in samples)
|
|
actual = download(b.interval_integral, (count, 4), np.float64)
|
|
np.testing.assert_allclose(actual, expected, rtol=1e-5, atol=2e-6)
|
|
|
|
|
|
if __name__ == '__main__':
|
|
unittest.main()
|