run: one fail-closed device transaction with translating circles

Split BodyManager action upload into host-only _prepare_action_upload
(validation + pinned staging) and _upload_prepared_action_async (H2D);
_upload_action_async stays the checked wrapper for direct callers.
Simulation.run prepares outside the failure boundary, then runs action
upload, obs/diagnostic zeroing, step group, readback and sync as one
transaction: with translating circles or attached moving tables any
exception fails every circle and the Simulation (also for run(0) and an
empty registry). The inner _run_moving catch is removed (its only caller
is run). Stationary runs keep their failure policy; pending/hold-consume
and run(0) success behaviour unchanged. No kernel change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

docs/moving_bodies.md

@@ -170,9 +170,9 @@ acts as a sliding wall. One moving step consumes one target.
 | `run(1)` without pending | hold: `c_old == c_new`, no cover/uncover, links at `applied`, translational `u_w = 0` |
 | `run(n > 1)` with pending | `ValueError` before mutation (single-step-only moving API) |
 | `run(n > 1)`, no pending | allowed: hold for n steps, translational `u_w = 0`, spin only |
-| `run(0)` | no motion upload, no commit; `pending` kept |
+| `run(0)` | no motion upload, no commit; `pending` kept; action upload and obs/diagnostic zeroing still run |
-| validation failure | `ValueError`, nothing mutated, retry allowed |
+| validation failure (incl. action validation and pinned staging in `run`) | `ValueError`/error before any device work, nothing mutated, retry allowed |
-| upload/launch/sync failure after enqueue | simulation unusable; `applied` and `pending` are not reported as device truth; no re-entry |
+| failure of any device work in `run` (action upload, obs/diagnostic zeroing, record upload, launch, readback, sync), also for `run(0)` | simulation unusable, every translating circle failed; `applied` and `pending` are not reported as device truth; no re-entry |
 
 Displacement norm: Euclidean per-step `|c_new - c_old|_2 ≤ 0.5` lattice
 cells (declared bound; CANDIDATE value).

research/viv_re150/README.md

@@ -1,23 +0,0 @@
-# Research VIV driver — coupling contract (not production)
-
-`run.py` couples a 1-DOF undamped spring–mass (`viv.py`) to the production
-moving-circle API. Everything specific to fluid–structure coupling lives here,
-not in `src/`.
-
-- Per step: known (y_n, v_n) and the last completed force F_last → exact
-  harmonic candidate (y_{n+1}, v_{n+1}) → `set_body(offset=(0, y_{n+1}),
-  vy=y_{n+1} − y_n)` (interval wall velocity, lattice dt = 1) → `run(1)` →
-  commit y, v and F_last only after the step succeeded. One step of explicit
-  force lag (weak coupling); no sub-iteration.
-- Structural RHS = CME + Wen (y), read from `moving_diagnostics()` by the
-  names in `MovingTables.DIAG`; raw CME, the `obs` force and node terms are
-  logged as diagnostics. This is a stage choice, not a validated force law.
-- Production guarantees used: fail-closed target commit (synchronized step,
-  `no_donor == 0`), input rejection before mutation, a failed device step
-  marks the Simulation failed.
-- Not provided, by design: device-resident structure state or batched
-  (multi-step) coupling, strong/sub-iterated coupling (would need state
-  rollback), more than one DOF. These are future work and would be a separate
-  execution path, not an abstraction over this driver.
-- Recorded result and limits: `docs/validation/moving_bodies_stage1.md`;
-  predeclaration: `docs/validation/viv_re150_predeclare.md`.

research/viv_re150/run.py

@@ -65,8 +65,7 @@ def main():
         step_cap = args.steps
     centre = (30.0 * Dn, 0.5 * (ny - 1))
 
-    from CelerisLab.body.motion import MovingTables, Translation
+    from CelerisLab.body.motion import Translation
-    col = {k: MovingTables.DIAG.index(k) for k in ("cme_y", "wen_y", "cover_jy", "uncover_jy", "no_donor")}
     from CelerisLab.simulation import Simulation
     with tempfile.NamedTemporaryFile("w", suffix=".json", delete=False) as fh:
         json.dump(cfg, fh)
@@ -96,9 +95,9 @@ def main():
             sim.run(1)                             # device failures raise and mark the Simulation failed
             d = sim.moving_diagnostics()[0]
             f_obs = sim.read_force(body)[1]
-            f_rhs = float(d[col["cme_y"]] + d[col["wen_y"]])   # CME + Wen (y)
+            f_rhs = float(d[1] + d[3])             # CME + Wen (y)
-            row = (n, y1, v1, f_rhs, float(d[col["cme_y"]]), float(d[col["wen_y"]]), float(f_obs),
+            row = (n, y1, v1, f_rhs, float(d[1]), float(d[3]), float(f_obs),
-                   float(d[col["cover_jy"]] - d[col["uncover_jy"]]), float(d[col["no_donor"]]))
+                   float(d[7] - d[10]), float(d[13]))
             if not viv.finite(row):                # every recorded output, not only the RHS
                 status = "fail_nonfinite_output"
                 break

src/CelerisLab/body/manager.py

@@ -629,10 +629,17 @@ class ObjectManager:
         cuda.memcpy_dtoh_async(self.obs_pinned, self.obs_gpu, stream)
 
     def _upload_action_async(self, stream: cuda.Stream) -> None:
-        """Async H2D of host action array to action_gpu.
+        """Checked async H2D of host action array to action_gpu."""
+        if self._prepare_action_upload():
+            self._upload_prepared_action_async(stream)
+
+    def _prepare_action_upload(self) -> bool:
+        """Validate the action array and stage it in pinned memory; no device work.
 
         Single gate for every action path (setters or direct ``action`` edits):
         surface-actuated and Jet-driven bodies must keep zero motion slots.
+        Returns False when there is nothing to upload. Restaging assumes no
+        copy from ``_action_pinned`` is in flight (``run`` ends with a sync).
         """
         slot = 3*(self.cfg.dim if self.cfg else 2)
         for obj in self.objects:
@@ -643,10 +650,14 @@ class ObjectManager:
             self.validate_jet_motion(obj.obj_id, {"vx": self.action[base], "vy": self.action[base+1],
                                                   "omega": self.action[base+slot-1]})
         if self.action_gpu is None or self.action.size == 0:
-            return
+            return False
         if self._action_pinned is None or self._action_pinned.size != self.action.size:
             self._action_pinned = cuda.pagelocked_empty(self.action.size, np.float32)
         self._action_pinned[:] = self.action
+        return True
+
+    def _upload_prepared_action_async(self, stream: cuda.Stream) -> None:
+        """Enqueue H2D of the staged ``_action_pinned`` (see ``_prepare_action_upload``)."""
         cuda.memcpy_htod_async(self.action_gpu, self._action_pinned, stream)
 
     @property

src/CelerisLab/body/motion.py

@@ -1,10 +1,10 @@
 # CelerisLab/body/motion.py
-"""Translation targets and device tables (dense double buffer, D2Q9 only).
+"""Host state of a translating circle (dense double buffer, D2Q9 only).
 
 Contract: docs/moving_bodies.md, sections 4a, 5 and 7. The applied geometry
 (last successfully committed offset) and an optional pending target are two
-separate facts; centres are always ``base + offset``. MovingCircle owns host
+separate facts; centres are always ``base + offset``. Nothing here touches
-targets, MovingTables owns device records, and Simulation commits completed steps.
+the device: the caller supplies upload/step/synchronize callables.
 """
 from __future__ import annotations
 
@@ -18,6 +18,10 @@ R_MIN = 4.0        # smallest radius covered by the donor enumeration
 
 Vec = Tuple[float, float]
 
+# D2Q9 non-rest directions, paired order of lbm/descriptors.
+_CX = (1, -1, 0, 0, 1, -1, 1, -1)
+_CY = (0, 0, 1, -1, 1, -1, -1, 1)
+
 
 def _vec(value, name: str) -> Vec:
     x, y = (float(v) for v in value)
@@ -94,6 +98,28 @@ class MovingCircle:
             offset, velocity = self.applied, (0.0, 0.0)
         return self.centre(self.applied), self.centre(offset), velocity
 
+    def advance(self, upload: Callable, step: Callable, synchronize: Callable) -> None:
+        """Single-circle transaction helper (unit tests): upload, step, sync, commit.
+
+        Not the production path: ``Simulation._run_moving`` batches all circles,
+        adds the ``no_donor`` gate and uses ``commit``/``fail`` directly.
+
+        Upload the record, run one step and commit only after a successful sync.
+
+        Any exception after the upload is attempted leaves device geometry
+        unknown: the circle is marked failed, never reports applied state again,
+        and the owner's ``on_failure`` hook is called.
+        """
+        record = self.record()
+        try:
+            upload(record)
+            step()
+            synchronize()
+        except BaseException as exc:
+            self.fail(exc)
+            raise
+        self.commit()
+
     def commit(self) -> None:
         """Applied := pending offset (caller has synchronized a successful step)."""
         if self.pending is not None:
@@ -117,6 +143,43 @@ class MovingCircle:
             raise RuntimeError("moving circle state is unknown after a failed step")
 
 
+def _inside(x: int, y: int, c: Vec, r: float) -> bool:
+    return (x - c[0]) ** 2 + (y - c[1]) ** 2 < r * r
+
+
+def empty_donor_cells(c_old: Vec, c_new: Vec, radius: float):
+    """Fresh cells (inside c_old, outside c_new) whose donor set V(x) is empty."""
+    r = radius
+    xs = range(math.floor(min(c_old[0], c_new[0]) - r) - 1, math.ceil(max(c_old[0], c_new[0]) + r) + 2)
+    ys = range(math.floor(min(c_old[1], c_new[1]) - r) - 1, math.ceil(max(c_old[1], c_new[1]) + r) + 2)
+    empty = []
+    for x in xs:
+        for y in ys:
+            if not _inside(x, y, c_old, r) or _inside(x, y, c_new, r):
+                continue
+            if not any(not _inside(x + cx, y + cy, c_old, r) and not _inside(x + cx, y + cy, c_new, r)
+                       for cx, cy in zip(_CX, _CY)):
+                empty.append((x, y))
+    return empty
+
+
+def enumerate_donor_coverage(radius: float, positions: int = 8, directions: int = 16) -> int:
+    """Count empty-donor fresh cells over sub-cell centres and moves of MAX_STEP.
+
+    Evidence for the declared bounds (radius >= R_MIN, |dc|_2 <= MAX_STEP),
+    not a proof; the device keeps the ``no_donor`` counter.
+    """
+    count = 0
+    for i in range(positions):
+        for j in range(positions):
+            c_old = (i / positions, j / positions)
+            for k in range(directions):
+                a = 2.0 * math.pi * k / directions
+                c_new = (c_old[0] + MAX_STEP * math.cos(a), c_old[1] + MAX_STEP * math.sin(a))
+                count += len(empty_donor_cells(c_old, c_new, radius))
+    return count
+
+
 class MovingTables:
     """Device tables of the translating circles for ``MovingCircleCells``/``Links``.
 

src/CelerisLab/simulation.py

@@ -216,6 +216,12 @@ class Simulation:
         self._failed = f"moving circle step failed: {exc!r}"
         self.stepper.blocked = self._failed  # direct stepper calls are refused as well
 
+    def _fail_moving_run(self, exc: BaseException) -> None:
+        # Device work was attempted with translating circles (or their tables) present.
+        for obj in self._moving_bodies():
+            obj.motion.fail(exc)
+        self._fail_moving(exc)  # also when tables are attached but no circle is registered
+
     def _attach_moving(self) -> None:
         # Direct stepper calls stay blocked until the moving tables exist.
         tables = getattr(self, "_moving_tables", None)
@@ -734,9 +740,20 @@ class Simulation:
         if stream is None:
             stream = self.stream
 
-        # Async upload action
+        # Host-only action validation and staging: a rejection here stays retryable.
-        if upload_act and self.bodies.count > 0:
+        staged = upload_act and self.bodies.count > 0 and self.bodies._prepare_action_upload()
-            self.bodies._upload_action_async(stream)
+        watched = bool(moving) or self.stepper.moving is not None
+        try:
+            self._run_steps(steps, stream, staged, sync_obs, zero_obs, checkpoint_interval)
+        except BaseException as exc:
+            if watched:  # device work was attempted: motion state is unknown
+                self._fail_moving_run(exc)
+            raise
+
+    def _run_steps(self, steps, stream, staged, sync_obs, zero_obs, checkpoint_interval):
+        """Device part of ``run``: action upload, obs zeroing, step group, sync."""
+        if staged:
+            self.bodies._upload_prepared_action_async(stream)
 
         # Zero obs segments before step group
         if zero_obs:
@@ -783,33 +800,28 @@ class Simulation:
     def _run_moving(self, steps, stream, sync_obs):
         """Steps with translating circles: hold, or one advancing step that commits
         each pending target only after synchronization and a zero ``no_donor`` count
-        (docs/moving_bodies.md 4a, 5). Any failure leaves the Simulation unusable."""
+        (docs/moving_bodies.md 4a, 5). ``run`` fails the Simulation on any exception."""
         tables = self.stepper.moving
         circles = [(obj.motion, obj.obj_id) for obj in self._moving_bodies()]
         pending = any(motion.pending is not None for motion, _ in circles)
-        try:
+        advancing = tables.upload_records(circles, stream)
-            advancing = tables.upload_records(circles, stream)
+        self.stepper._step(steps, action_gpu=self.bodies.action_gpu,
-            self.stepper._step(steps, action_gpu=self.bodies.action_gpu,
+                           obs_gpu=self.bodies.obs_gpu, stream=stream, advance=advancing)
-                               obs_gpu=self.bodies.obs_gpu, stream=stream, advance=advancing)
+        self.bodies.increment_obs_steps(steps)
-            self.bodies.increment_obs_steps(steps)
+        if sync_obs:
-            if sync_obs:
+            self.bodies.download_obs_full_async(stream)
-                self.bodies.download_obs_full_async(stream)
+        stream.synchronize()
-            stream.synchronize()
+        if advancing:
+            no_donor = tables.download_diagnostics()[:, tables.DIAG.index("no_donor")]
+            if np.any(no_donor > 0):
+                raise RuntimeError("translating circle refill found no donor cell")
+        if pending:  # a target equal to the applied offset is consumed as a hold step
+            for motion, _ in circles:
+                motion.commit()
             if advancing:
-                no_donor = tables.download_diagnostics()[:, tables.DIAG.index("no_donor")]
+                tables.upload_records(circles, stream)  # first hold: old = new = applied, u = 0
-                if np.any(no_donor > 0):
+                stream.synchronize()
-                    raise RuntimeError("translating circle refill found no donor cell")
+            self._attach_moving()
-            if pending:  # a target equal to the applied offset is consumed as a hold step
-                for motion, _ in circles:
-                    motion.commit()
-                if advancing:
-                    tables.upload_records(circles, stream)  # first hold: old = new = applied, u = 0
-                    stream.synchronize()
-                self._attach_moving()
-        except BaseException as exc:
-            for motion, _ in circles:  # device geometry/state unknown after any failure
-                motion.fail(exc)
-            raise
 
     def step(self, n: int = 1):
         """Advance *n* steps (convenience for interactive use)."""

tests/unit/test_moving_bodies.py

@@ -1,13 +1,14 @@
-"""Translating-circle host contract (docs/moving_bodies.md 4a, 5, 7).
+"""Translating-circle host contract, S1 (docs/moving_bodies.md 4a, 5, 7).
 
-Real Simulation entrypoints with device doubles; no CUDA context or GPU work.
+Host doubles only: no kernels exist yet, so every positive-step run with a
+moving body must be rejected before any device write.
 """
-import math
 from types import SimpleNamespace
 
 import pytest
 
-from CelerisLab.body.motion import MAX_STEP, R_MIN, MovingCircle, Translation
+from CelerisLab.body.motion import (MAX_STEP, R_MIN, MovingCircle, Translation,
+                                    enumerate_donor_coverage)
 
 BAD = (float("nan"), float("inf"))
 
@@ -45,96 +46,46 @@ def test_targets_validate_against_applied_and_last_wins():
     assert c.applied == (0., 0.)
 
 
-def test_record_commit_and_hold(monkeypatch):
+def test_record_commit_and_hold():
-    sim, writes, c = routed_advancing_simulation(monkeypatch)
+    c = circle()
-    assert c.record() == ((50., 40.), (50., 40.), (0., 0.))
+    assert c.record() == ((50., 40.), (50., 40.), (0., 0.))  # hold: no translation velocity
-    sim.set_body(0, offset=(0., .25), vy=.05)
+    c.set_target((0., .25), (0., .05))
     assert c.record() == ((50., 40.), (50., 40.25), (0., .05))
-    seen_at_sync = []
+    uploads = []
-    sim.run(1, stream=SimpleNamespace(synchronize=lambda: seen_at_sync.append(c.applied)))
+    c.advance(uploads.append, lambda: None, lambda: None)
-    assert seen_at_sync == [(0., 0.), (0., .25)]  # commit between step sync and hold sync
+    assert uploads == [((50., 40.), (50., 40.25), (0., .05))]
-    uploads = [w[1][0] for w in writes if isinstance(w, tuple) and w[0] == "upload"]
-    assert uploads == [((50., 40.), (50., 40.25), (0., .05)),
-                       ((50., 40.25), (50., 40.25), (0., 0.))]
     assert c.applied == (0., .25) and c.pending is None  # offset-only commit
-    sim.run(1, stream=STREAM)  # no new target: hold step
+    c.advance(uploads.append, lambda: None, lambda: None)  # no new target: hold step
-    uploads = [w[1][0] for w in writes if isinstance(w, tuple) and w[0] == "upload"]
     assert uploads[-1] == ((50., 40.25), (50., 40.25), (0., 0.)) and c.applied == (0., .25)
-    sim.set_body(0, offset=(0., 0.), vy=-.05)  # zero offset is a real target
+    c.set_target((0., 0.), (0., -.05))  # return to zero offset is a real target
     assert c.pending == ((0., 0.), (0., -.05))
-    sim.run(1, stream=STREAM)
+    c.advance(uploads.append, lambda: None, lambda: None)
     assert c.applied == (0., 0.) and c.pending is None
 
 
 @pytest.mark.parametrize("stage", ("upload", "step", "synchronize"))
-def test_failure_after_upload_attempt_is_fail_closed(monkeypatch, stage):
+def test_failure_after_upload_attempt_is_fail_closed(stage):
-    sim, writes, c = routed_advancing_simulation(monkeypatch, fail="upload" if stage == "upload" else None)
+    c = circle()
-    sim.set_body(0, offset=(0., .25), vy=.05)
+    c.set_target((0., .25), (0., .05))
 
-    def fail(*a, **k):
+    def call(name):
-        raise RuntimeError(f"{stage} failed")
+        def run(*_):
-    if stage == "step":
+            if name == stage:
-        sim.stepper._step = fail
+                raise RuntimeError(f"{name} failed")
-    stream = SimpleNamespace(synchronize=fail) if stage == "synchronize" else STREAM
+        return run
     with pytest.raises(RuntimeError, match=f"{stage} failed"):
-        sim.run(1, stream=stream)
+        c.advance(call("upload"), call("step"), call("synchronize"))
-    assert c.failed and c.applied == (0., 0.) and c.pending == ((0., .25), (0., .05))
+    assert c.failed and c.applied == (0., 0.)
-    assert sim._failed is not None and sim.stepper.blocked == sim._failed
+    for later in (c.record, lambda: c.set_target((0., .1), (0., 0.)),
-    for later in (c.record, lambda: sim.set_body(0, offset=(0., .1), vy=0.)):
+                  lambda: c.advance(*(lambda *_: None,) * 3)):
         with pytest.raises(RuntimeError, match="unknown"):
             later()
-    with pytest.raises(RuntimeError, match="Simulation failed"):
-        sim.run(1, stream=STREAM)
-    with pytest.raises(RuntimeError, match="moving circle step failed"):
-        sim.stepper.step(1, action_gpu=None, obs_gpu=None)
 
 
 def test_band_covers_offset_box_with_margin():
     assert circle().band() == (50 - 2 - 10 - 2, 50 + 2 + 10 + 2, 40 - 3 - 10 - 2, 40 + 3 + 10 + 2)
 
 
-# D2Q9 non-rest directions, paired order of lbm/descriptors.
-_CX = (1, -1, 0, 0, 1, -1, 1, -1)
-_CY = (0, 0, 1, -1, 1, -1, -1, 1)
-
-
-def _inside(x: int, y: int, c, r: float) -> bool:
-    return (x - c[0]) ** 2 + (y - c[1]) ** 2 < r * r
-
-
-def empty_donor_cells(c_old, c_new, radius: float):
-    """Fresh cells (inside c_old, outside c_new) whose donor set V(x) is empty."""
-    r = radius
-    xs = range(math.floor(min(c_old[0], c_new[0]) - r) - 1, math.ceil(max(c_old[0], c_new[0]) + r) + 2)
-    ys = range(math.floor(min(c_old[1], c_new[1]) - r) - 1, math.ceil(max(c_old[1], c_new[1]) + r) + 2)
-    empty = []
-    for x in xs:
-        for y in ys:
-            if not _inside(x, y, c_old, r) or _inside(x, y, c_new, r):
-                continue
-            if not any(not _inside(x + cx, y + cy, c_old, r) and not _inside(x + cx, y + cy, c_new, r)
-                       for cx, cy in zip(_CX, _CY)):
-                empty.append((x, y))
-    return empty
-
-
-def enumerate_donor_coverage(radius: float, positions: int = 8, directions: int = 16) -> int:
-    """Count empty-donor fresh cells over sub-cell centres and moves of MAX_STEP.
-
-    Evidence for the declared bounds (radius >= R_MIN, |dc|_2 <= MAX_STEP),
-    not a proof; the device keeps the ``no_donor`` counter.
-    """
-    count = 0
-    for i in range(positions):
-        for j in range(positions):
-            c_old = (i / positions, j / positions)
-            for k in range(directions):
-                a = 2.0 * math.pi * k / directions
-                c_new = (c_old[0] + MAX_STEP * math.cos(a), c_old[1] + MAX_STEP * math.sin(a))
-                count += len(empty_donor_cells(c_old, c_new, radius))
-    return count
-
-
 @pytest.mark.parametrize("radius", (R_MIN, 4.3, 7.5, 12.0))
 def test_refill_donor_sets_nonempty_within_bounds(radius):
     # Evidence for R >= R_MIN and |dc|_2 <= MAX_STEP on a fixed sample, not a proof.
@@ -162,7 +113,8 @@ def moving_simulation(monkeypatch, *, moving=True):
     sim._failed, sim._initialized = None, True
     sim.bodies = SimpleNamespace(objects=[obj], count=1, jets=[], action_gpu=None, obs_gpu=None,
                                  has_pending_edit=lambda: False,
-                                 _upload_action_async=lambda s: writes.append("action"),
+                                 _prepare_action_upload=lambda: True,
+                                 _upload_prepared_action_async=lambda s: writes.append("action"),
                                  zero_obs_async=lambda s: writes.append("obs"),
                                  increment_obs_steps=lambda n: writes.append("count"),
                                  download_obs_full_async=lambda s: writes.append("download"))
@@ -327,26 +279,6 @@ def advancing_simulation(monkeypatch, **tables):
     return sim, writes, sim.bodies.objects[0].motion
 
 
-def routed_advancing_simulation(monkeypatch, **tables):
-    """Real body registration, target routing, run and owner hook; double device I/O."""
-    sim = routed_simulation(monkeypatch)
-    bid = sim.add_body("circle", (50., 40.), 10., translation=Translation((-2., 2., -3., 3.), .1))
-    sim._initialized = True
-    sim._assert_runtime_contracts = lambda: None
-    writes = []
-    monkeypatch.setattr(sim.bodies, "_upload_action_async", lambda s: writes.append("action"))
-    monkeypatch.setattr(sim.bodies, "zero_obs_async", lambda s: writes.append("obs"))
-    monkeypatch.setattr(sim.bodies, "download_obs_full_async", lambda s: writes.append("download"))
-    sim.stepper = SimpleNamespace(
-        moving=Tables(writes, **tables), blocked=None,
-        _step=lambda n, advance=False, **k: writes.append(("step", n, advance)))
-    from CelerisLab.lbm.stepper import LBMStepper
-    sim.stepper.step = LBMStepper.step.__get__(sim.stepper)
-    sim._moving_tables = sim.stepper.moving
-    sim._attach_moving()
-    return sim, writes, sim.bodies.get(bid).motion
-
-
 def test_run_one_advances_and_commits_after_sync(monkeypatch):
     sim, writes, motion = advancing_simulation(monkeypatch)
     motion.set_target((0., .25), (0., .05))
@@ -430,6 +362,78 @@ def test_failed_advance_fails_simulation(monkeypatch, failure):
         sim.run(1, stream=STREAM)
 
 
+def raising(log, name, site):
+    def call(*a, **k):
+        log.append(name)
+        if name == site:
+            raise RuntimeError(f"{name} failed")
+    return call
+
+
+def two_circle_simulation(monkeypatch, site):
+    # No owner hooks: run itself must fail the Simulation and every circle.
+    sim, writes, first = advancing_simulation(monkeypatch)
+    second = SimpleNamespace(motion=circle(), obj_id=1, center=(80., 40.), radius=10.)
+    sim.bodies.objects.append(second)
+    sim.bodies._upload_prepared_action_async = raising(writes, "action", site)
+    sim.bodies.zero_obs_async = raising(writes, "obs", site)
+    sim.bodies.download_obs_full_async = raising(writes, "download", site)
+    sim.stepper.moving.zero_diagnostics = raising(writes, "zero_diag", site)
+    step = raising(writes, "step", site)
+    sim.stepper._step = lambda n, advance=False, **k: step()
+    return sim, (first, second.motion), SimpleNamespace(synchronize=raising(writes, "sync", site))
+
+
+@pytest.mark.parametrize("steps,site", [(n, s) for n in (0, 1, 3)
+                                        for s in ("action", "obs", "zero_diag", "step", "download", "sync")
+                                        if not (n == 0 and s == "step")])  # run(0) launches nothing
+def test_device_failure_in_run_fails_every_circle(monkeypatch, steps, site):
+    sim, motions, stream = two_circle_simulation(monkeypatch, site)
+    if steps < 2:
+        motions[0].set_target((0., .25), (0., .05))
+    with pytest.raises(RuntimeError, match=f"{site} failed"):
+        sim.run(steps, stream=stream)
+    assert all(m.failed for m in motions) and sim._failed is not None
+    assert sim.stepper.blocked == sim._failed
+    assert motions[0].applied == (0., 0.)  # nothing committed before the first sync
+    with pytest.raises(RuntimeError, match="Simulation failed"):
+        sim.run(1, stream=STREAM)
+
+
+def test_action_rejection_stays_retryable_before_device_work(monkeypatch):
+    sim, writes, motion = advancing_simulation(monkeypatch)
+    motion.set_target((0., .25), (0., .05))
+
+    def reject():
+        raise ValueError("bad action")
+    sim.bodies._prepare_action_upload = reject
+    for steps in (0, 1):
+        with pytest.raises(ValueError, match="bad action"):
+            sim.run(steps, stream=STREAM)
+    assert writes == [] and sim._failed is None and sim.stepper.blocked is None
+    assert not motion.failed and motion.pending is not None
+    sim.bodies._prepare_action_upload = lambda: True
+    sim.run(1, stream=STREAM)
+    assert motion.applied == (0., .25) and motion.pending is None
+
+
+def test_attached_tables_without_circles_fail_closed(monkeypatch):
+    sim, writes, _ = advancing_simulation(monkeypatch)
+    sim.bodies.objects = []
+    sim.stepper.moving.zero_diagnostics = raising(writes, "zero_diag", "zero_diag")
+    with pytest.raises(RuntimeError, match="zero_diag failed"):
+        sim.run(0, stream=STREAM)
+    assert sim._failed is not None and sim.stepper.blocked == sim._failed
+
+
+def test_stationary_run_failure_policy_unchanged(monkeypatch):
+    sim, writes = moving_simulation(monkeypatch, moving=False)
+    sim.bodies.zero_obs_async = raising(writes, "obs", "obs")
+    with pytest.raises(RuntimeError, match="obs failed"):
+        sim.run(2, stream=STREAM)
+    assert sim._failed is None and sim.stepper.blocked is None
+
+
 def test_failed_hold_step_blocks_the_direct_stepper(monkeypatch):
     # No target is pending, so only the failure latch can refuse direct steps.
     from CelerisLab.lbm.stepper import LBMStepper
@@ -614,21 +618,23 @@ def test_moving_circle_excluded_from_static_links():
 
 
 def test_failed_moving_step_marks_simulation_failed(monkeypatch):
-    sim, writes, motion = routed_advancing_simulation(monkeypatch)
+    sim = routed_simulation(monkeypatch)
     sim.ctx = ClosableOwner()
-    sim.set_body(0, offset=(0., .2), vy=.05)
+    bid = sim.add_body("circle", (50., 40.), 10., translation=Translation((0., 0., -1., 1.), .1))
+    motion = sim.bodies.get(bid).motion
+    motion.set_target((0., .2), (0., .05))
 
     def fail(*_):
         raise RuntimeError("sync failed")
     with pytest.raises(RuntimeError, match="sync failed"):
-        sim.run(1, stream=SimpleNamespace(synchronize=fail))
+        motion.advance(lambda *_: None, lambda: None, fail)
     assert sim._failed is not None and motion.applied == (0., 0.)
     for call in (lambda: sim.run(0), lambda: sim.run(1), sim.step, sim.sync_bodies,
                  sim.save_checkpoint, lambda: sim.load_checkpoint("x.h5")):
         with pytest.raises(RuntimeError, match="Simulation failed"):
             call()
     with pytest.raises(RuntimeError, match="unknown"):  # no retry on the failed circle
-        sim.set_body(0, offset=(0., .1), vy=.05)
+        motion.advance(lambda *_: None, lambda: None, lambda: None)
     with sim.ctx.activate():  # a refused close keeps the failed state and resources
         with pytest.raises(RuntimeError, match="active CUDA"):
             sim.close()